Manual Midland XTC 450 (page 19 of 117) (English, German, Dutch, French, Italian, Portuguese, Spanish)

579589

Zoom out

Zoom in

1/117

Midland XTC450 - 17

Mounting and Aiming Your Camera

Mount on Dual Track System

The XTC450 was designed with an innovative 3 point

mount system on both sides and the bottom of the camera.

This allows you to mount it on any side with ease.

To mount the camera on the basic mount, slide the camera

onto the track system with the notches on the mount fa-

cing toward the back of the camera.

To detach the camera from the mount, squeeze the mount

release tabs and slide the camera forward.

Aiming the Camera when mounted with the dual track

mount:

When mounting the camera on a helmet, you must do the

following:

1. Consider what you would like to shoot and mount the

camera accordingly- left side, right side or top.

2. Find an appropriate surface and ensure the area is clean

of dirt and debris.Remove the cover of the adhesive pad

and adhere to the helmet.

3. Once attached, adjust the camera to be sure you are ﬁl-

ming in the intended direction

4. If needed, rotate the lens to maintain an upright viewing

angle

5. To see where your camera is aimed, enable Wi-Fi and use

your smartphone with the app as a viewﬁnder.

Mounting and Aiming Your Camera

Mount using the Thread Mount

On the bottom of the XTC450 is a standard thread mount

that allows the camera to be mounted to a tripod or other

ﬁxture with a 1/4-20 (1/4” diameter, 20 threads per inch)

5/16 deep thread. To attach the camera, insert the screw on

the mount into the camera thread and rotate the camera

clockwise to tighten down onto the screw.

Note: Over tightening may cause damage to the mount and/

or camera

Tripod Mount

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Midland XTC 450 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 11,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Midland XTC 450 Manual

Product: