10
• FCWS - Front Collision Warning system: the driver will be advised 3 seconds before a possible
dangerous event happens, in case of excessive reduction of the braking distance.
Motion detection: On/O. This function is disabled by default. Before activating or enabling it, you
have to select “Auto o” OFF (Automatic switching o).
With the motion detection feature the camera automatically starts recording everytime a movement is
picked up: either a person or an object; and will stop recording as soon the motion stops.
Important: the motion detection picks up evident movements and not the little ones; therefore this may
cause a chopped recording because little motions are not detected.
G sensor setting: O / High / Medium / Low
When the G sensor is enabled, in case of car collision it will automatically save and lock the file.
Parking mode: On/O. This function is deactivated by default.
To activate it, set “Parking Mode” in the menu setting and select ON.
When the vehicle vibrates owing to a collision the camera will automatically turn on and starts recording.
STREET GUARDIAN NIGHT will be recording for 1 minute and the file will be locked and protected
from being overwritten by cycle recording.
Split (loop) Record Mode: O / 1min / 3min / 5min
When this mode is OFF, the camera stops recording when the micro SD card is full.
If this function is enabled, the car camcorder continues recording deleting the older videos. The videos
protected by overwriting won’t be deleted.
Microphone on/o. This option is activated by default.
The camera records video with audio; when this mode is OFF, it will record only videos.
Anti-flicker: 60Hz 50 Hz
System settings
Turn on the car camcorder and enter the video mode: the video icon will appear on the top left corner
of the LCD.
Shortly press the MENU button to open the video settings, then press the MODE control to switch to
system settings: a blue gear icon will be shown on the top right corner of the LCD.
The following settings are available:
• Language
• ID driver
• Time/date
• Time zone
• Stamp
• Format
• Reset
• Auto power o
• SD card info
• Tone (beep sound)
• Display back light o
• Over speed warning setting
• Version information