579587
14
Zoom out
Zoom in
Previous page
1/26
Next page
14
ENGLISH
1) Ensure the channel you’ve selected is not a reception-only channel
(if it is, the transmission will be disabled) and that no one else is
talking (this will appear on your display as the BUSY icon).
2) Hold down the PTT button: will appear on the display, and the
icon will indicate your relative transmission power (the number
of bars is proportional to your relative transmission power).
3) Wait a second, then speak in a normal voice, facing the transcei-
ver’s microphone at a distance of approx. 5 cm.
4) When you have completed your message, release the PTT button:
and will disappear from the display and the transceiver will
return to reception mode.
Obviously, you can only communicate with stations that are tuned
on the same channel.
If the BUSY icon appears on the display, but you don’t hear
anything, you may have accidentally turned the volume to the
minimum level.
5.5 Monitor function
The (Monitor) button is for temporarily excluding (opening) the
circuit which silences the receiver in the absence of signals (squelch)
in order to listen for extremely weak signals that can’t open the squel-
ch stably. In this mode, you avoid listening to broken communication.
To activate the monitor function, hold down the button until you
hear background noise (or else a weak signal). Release the but-
ton when you have finished listening.
If you wish to keep the squelch open for longer periods without
holding down the button, press the button for at least 5
seconds, until you hear two acoustic sounds (beeps), then release
the button. The squelch will remain open until you briefly press the
button again.
5.6 Selecting transmission power
The transmission phase absorbs the most energy. To extend the bat-
tery duty, you can select low transmission power when transmitting
over short distances. To do this, briefly press the HI/LO button: LOW
will appear on the display (low power is approx. 0.5 W). If you wish to
transmit or receive over long distances or with weak signals, press
the HI/LO button again: LOW will disappear and high power will be
selected (approx. 2W).
The transceiver is factory preset on high power.
5.7 Instant recall of channel 16
Channel 16 is used as the universal marine channel for emergency
communication. Your transceiver is equipped with a button that provi-
des instant access to this channel. To instantly recall channel 16, press
the ch 16 button. Channel 16 will be selected (regardless of the usage
mode selected, except for scanning). To return to the channel selected
previous to channel 16, press the ch 16 button again.
5.8 Display lighting
If environmental light is insufficient for reading the display, you can
activate the backlighting for 10-second intervals by briefly pressing
the button. If you wish to deactivate backlighting before the end
of this pre-set time, press the button again.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midland Ocean at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midland Ocean in the language / languages: English as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Midland Ocean

Midland Ocean User Manual - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info