519245

Midland Neptune 100 Manual

43
Zoom out
Zoom in
Previous page
1/57
Next page
14
ENGLISH
6. SCANNING FUNCTIONS
6.1 Channel scanning
NEPTUNE 100 can automatically search for signals throughout the marine band by scanning,
or selecting the channels in rapid sequence. When a signal is detected, the scanning pauses
on that channel (RX displayed) and remains blocked until the signal ends. Before the scanning
automatically starts again, NEPTUNE 100 waits for a 3,4 seconds in case the user wants to
transmit.
You can transmit in any moment, even if the scanning is active. In this case, the transmission will
be done on the channel currently scanned; but if you transmit just after a signal is detected, the
radio will transmit on that channel.
After the transmission, the scanning is interrupted.
If the scanning detects an undesired channel, you can start scanning again by pushing STEP/
SCAN.
To activate the Scan function:
Hold down the STEP/SCAN button till scan blinks on the display; press MENU/SELECT to conrm
your selection. The scanning will start.
The scanning and the memory scanning cannot properly work if the squelch is not adjusted as
previously described.
To activate the Mem Scan function:
• keep pressed STEP/SCAN till scan blinks on the display;
• with the UP/DOWN keys select mem scan;
• conrm your selection by pushing MENU/SELECT.
Now the scanning of the stored channels starts.
To stop it, push STEP/SCAN and the radio will stop on the channel scanned in that moment.
• Reception: if NEPTUNE 100 detects a signal, the scanning interrupts and the display
indicates “RX”.
• Transmission: you can transmit in any moment, even if the scanning is active. In this case,
NEPTUNE 100 will transmit from the channel being scanned in that moment; but if the
transmission is done after a channel is picked up, the device will transmit from that channel
within 3 / 4 seconds. After the transmission, the scanning interrupts.
6.2 Dual Watch and Triple Watch
Dual Watch
Allows you to monitor two channels at the same time: the channel in use and channel 16 (emergency
channel).
To activate this function, push DW and the radio will start monitoring both channels.
To disable this function push DW again and the radio will return to the channel in use.
If you push PTT the scanning will stop and the radio will go to channel 16.
The Dual Watch and Triple Watch stop when a signal is picked up, giving you the possibility to
answer.
These functions cannot operate properly if the squelch is not adjusted.
… 43 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midland Neptune 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midland Neptune 100 in the language / languages: English, German as an attachment in your email.

The manual is 1,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info