738473

Midland M20 Manual

15
Zoom out
Zoom in
Previous page
1/68
Next page
M-20 Instruction Guide | 3
G. Selected frequency band
H. NB filter (Noise Blanker) activated. Some interferences are short pulses
of very high peak energy; typical and most well known is the car ignition
noise. This filter blocks the signal at every pulse.
I. ANL filter activated. It’s an automatic noise limiter that clips impulse and
static noise peaks, so that that the desired signal is not aected.
J. The internal speaker of the radio is selected
K. Appears on the display when the audio of your CB is active. If this icon
is not displayed, it means that the radio is in “mute” condition (audio o)
L. The audio of your CB is coming from the 3.5mm jack (external headset)
M. Option not activated.
3. EMG (Emergency button): press it to immediately switch to channel 9
(emergency channel). 9 will blink on the display and it will not be possible to
accidentally change the channel.
4. USB port: this socket is a 5V power supply source for your devices.
5. AUDIO: this button lets you manage the audio of your CB and/or select
the desired type of audio: you can choose between the traditional mike or
connect an external accessory to the 2pin plug. Briefly press the button to
activate/deactivate the radio speaker (MUTE function). The icon on the
display indicates that the audio is active. Keep pressed this control to select
the standard microphone and/or the 2pin plug. You can connect to this plug
a 2pin MIDLAND headset or the new MIDLAND Bluetooth adaptor WA-
DONGLE that lets you use the CB remotely. Go to www.midlandeurope.com
to have a look at the Bluetooth devices of the WA-line.
6. AM/FM (EC/EN) button: Dual-function selector.
AM/FM: to select AM or FM mode. If you push it along with the EMG button
at the turning on of the radio, the radio will make a reset and will be tuned on
the EC band. If you select a frequency band operating in FM mode only, this
control enables the LCR function (Last Channel Recall).
EC/EN: when the UK band is selected (UK on the display),move this switch
to activate the EN (English) or EC (European) bands.
7. FILTER (SCAN) button: dual function control. If you briefly press this but-
ton the two filters ANL/NB will be activated; while if you keep it pressed,
M-20 will start searching the busy channel (SCAN). Rotate the squelch knob
clockwise till the background noise disappears or rotate it counter-clockwise
(DS position) and stop after you hear a “clic”. Hold down the FILTER/SCAN
button. The radio will automatically and repeatedly scan all channels and will
stop on a busy channel.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midland M20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midland M20 in the language / languages: English, German, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info