579696

Midland GEOPOINT BOX Manual

16
Zoom out
Zoom in
Previous page
1/36
Next page
Safety Instructions
15
Tracker Management by SMS
CYCLIC GPRS CONNECTION
The cyclic GPRS connection allows to connect the tracker automatically at a programmed rate for the
continuous position updating. At the programmed rate, the tracker will be connected only for the time needed
for sending the position point. This function is very useful if combined with the I-Scout web server as it allows
to display the detected positions by every station connected to internet.
To use this function, it is necessary to:
set the GPRS communication parameters using the provided software or sending an SMS command•
enable the function setting the rate for cyclic GPRS connection using the provided software•
Anchor
The Anchor function allows to monitor within a pre-established circular area the position of a person, an object
or an animal. When the tracker detects the exiting from the pre-established area or the ri-entering, it sends an
alarm SMS containing its position data to the preset phone number.
This function is programmable using the complete SMS command (enabling and radius setting) or partially
by the provided software.
When the complete SMS command is received by the tracker (e.g. wanc=1,0500), the function is enabled and
the current tracker position is considered as area central point. If the function is enabled without setting the
radius, the previously set coordinates for the central point and the last programmed radius will be considered.
If no radius was previously programmed, by default it will be set to 100 m.
This function is programmable completely by SMS command (wanc). By the provided software, only function
enabling and radius setting is possible.
Before enabling this function, it is necessary to set the phone number where
SMS will be sent by means of the provided software.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midland GEOPOINT BOX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midland GEOPOINT BOX in the language / languages: English as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info