738684
11
Zoom out
Zoom in
Previous page
1/18
Next page
GB1 instruction guide | 9
Menu
In the functions Menu it is possible to change the radio’s parameters. Press the
Menu button and select the desired function (from F1 to F5) by using the
or keys. Confirm by pressing Menu again and select the desired value
with the or buttons.
The functions menu is composed of the following 5 options listed here below:
F1 CTCSS (subaudio tones): you can select the desired CTCSS tone; you
can choose amongst 50 dierent tones from 67Hz to 254,1Hz. If you
select ‘OF’ the CTCSS tone is disabled.
F2 DSC codes: the codes available are from 1 to A4. If you select ‘OF’ the
DCS code is disabled.
F3 SQUELCH LEVEL: it allows to select the squelch threshold level (from
0 to 9. 0 = no squelch threshold). To open the squelch and disable a
threshold previously set, press
.
F4 KEYPAD BEEP: whenever a key is pressed the radio will emit a beep
tone. If it’s too loud or too soft for you, it can be adjusted with 9 dierent
levels between b0 and b8. b0 = no beep.
F5 RF POWER: to select the tx power level. Two levels are available: HI
(high) and LO (low). This menu is active only in the export version.
 If you hold down the Menu button for 3 seconds, you will enable the keypad
lock; the display shows
and only and keys will be active.
To disable the keypad lock push the Menu button again for 3 seconds.
Monitor
This function allows to temporarily open the squelch so as to listen to signals
that are too weak to be received. Briefly press to open the squelch. This key
also excludes the CTCSS and DCS tones programmed on that channel.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midland GB1-R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midland GB1-R in the language / languages: English as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Midland GB1-R

Midland GB1-R User Manual - German - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info