18 | Midland CT990 instruction guide
Power on tone (Power on Tone) - Menu Utilities 32
In this Menu you set the tone you will hear when the radio is turned on.
The options available are 3:
NONE (default message)
TONE (beep tone)
VOICE (voice indicating that the radio is switched on)
In Standby mode push Menu Utilities + 32; the display will show “POWER
ON TONE”.
Push Menu to enter the function. Press the ▼/▲ controls or rotate the en-
coder to select the desired option and confirm by pushing Menu. To return in
standby condition, press Back.
Power on image (POWER ON DISPLAY) - Menu Utilities 33
With this function you set the image displayed at the turning on of the radio.
Choose amongst the following options:
NONE (no logo)
VOLTAGE (the power voltage is momentarily displayed)
MESSAGE (welcome message)
PICTURE (Midland brand. Default setting)
MODEL NAME (the model name of the radio will be displayed)
In Standby mode press Menu Utilities + 33; the display will show “POWER
ON DISPLAY”.
Push Menu to enter the function.
Press ▼/▲ or rotate the encoder to choose the desired option and then press
Menu for confirmation.
To return in standby condition, push Back.
Welcome message (POWER ON MSG) - Menu Utilities 34
With this Menu you can customize the welcome message that appears on the
display when the radio is switched on.
In Standby mode press Menu Utilities + 34; the display will show “POWER
ON MSG”.
Press Menu to enter the function. Now you can edit your message with the
keypad buttons.
Confirm the message by pushing Menu. Press Back to return to standby mode.