Manual Midland CT790 (page 11 of 16) (English)

543253

Zoom out

Zoom in

1/16

FREQUENCY SHIFT DIRECTION (SFT-D) ---- MENU24

In standby mode, press MENU + 24. The screen will display “SFT-D”.

Press MENUtoenterthefunction.Pressthe▲/▼buttonstoselect+/-/OFF, then press MENU

toconrm.

To return to the standby mode press EXIT.

+ (positive offset): If the transmitting frequency is higher than the receive one.

- (negative offset): If the transmitting frequency is lower than the receive one.

OFF: frequency shift turned off.

STOPWATCH TIMER (SECOND) --- MENU 25

In standby mode, press MENU + 25. The screen displays “SECOND”.

Press MENUtoenter.Pressthe▲/▼buttonstoenable/disable(ON/OFF)thefunction,thenpress

MENUtoconrm.ToreturntothestandbymodepressEXIT.

Using the stopwatch timer:

When this function is ON, press

to start counting, to stop counting you can press any key.

Press

again to re-start counting.

Toexitthefunction,stopthecountingrst,andthenpresstheEXIT button.

CHANNEL NAME (CHNAME) --- MENU 26

To set the channel name, you have at your disposal 26 letters (A to Z) and 10 numbers (0 to 9).

You can choose only 6 characters to create the channel name.

To edit the channel name:

At least one channel should have been stored.

To display the name of the channels, press MENU + 21.

Select the desired channel, then press MENU+ 26 + MENU. The screen displays six ‘_’ symbols.

Press ▲ to select the character and ▼toconrmandgoon,thenpress▲ again to select the se-

condcharacter.and▼toconrmandgoon.AfterhaveselectedthesixthcharacterspressMENU

toconrm.ToexitthefunctionpressEXIT. The screen displays the channel name and also the

channel number on the right corner of the display.

STORED CHANNELS (MEM-CH) --- MENU 27

In Frequency and in Standby mode, you can store frequencies and parameters.

Press MENU + 27; the screen will display “MEM-CH”.

Press MENUtoenterthefunction.Pressthe▲/▼buttonstoselectthechannel,thenpressMENU

to store it.

Avocalsoundwillconrmthestoringsuccess.PressEXIT to exit the current channel

E.g.: to set 430.025MHz as receiving frequency and 435.025MHz as transmitting frequency in

CH-20, follow these steps:

1. On Frequency mode, digit 430025, then MENU+ 27 + MENU, to enter the function. Digit 20 or

usethe▲/▼buttonstoselectCH-20. Press MENUtoconrm.Avocalsoundwillconrmthe

storage success, then press the EXIT button.

2. Digit 435025 and then MENU+ 27 + MENU + MENU.Avocalsoundwillconrmthestorage

success, then press the EXIT button.

NOTE:

If the stored channel needs a CTCSS/DCS code, you should set it before storing the channel.

Itispossibletotransmitonthestoredchannelonlyifyouhavestoreditsfrequencyrst.

Manual storage is possible only on empty channels, after have deleted all the previous parame-

ters.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Midland CT790 in the language / languages: English as an attachment in your email.

The manual is 1,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Midland CT790

Midland CT790 User Manual - German - 20 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Midland CT790 Manual

Product: