Manual Midland CT590S (page 27 of 32) (English)

738653

Zoom out

Zoom in

1/32

CT590S user’s manual | 23

4. Press 1 on the main radio. The red led of the main radio and the green led of

the sub-radio will blink. ‘CL-OUT’ will appear on the display.

5. When the two leds do not blink anymore, the LCD of the main radio shows

‘COPING’ and the sub-radio reboots: this means that cloning is ﬁnished.

Before using the radios, turn them o and then on.

Memory/Frequency Mode conversion (VFO/MR)

To switch between memory and frequency mode push VFO/MR.

TX 1750Hz Call Tone

Press PTT + BAND to send 1750Hz call tone. This function is useful for com-

munications through repeaters.

TX/RX Reverse function (R)

The reverse frequency function interchanges the TX frequency with RX. This

function is very helpful when you operate with a repeater; you can check whe-

ther it is possible to receive the communication from the other part without

the use of the repeater.

Note: Brieﬂy press * to enable/disable this function.

Frequency scanning

This function can scan the frequency.

1. In frequency mode , press * key for more than 2 seconds. The radio will start

scanning the frequency according to the set frequency step.

2. You can change the scanning direction with the ▲/▼ keys.

3. Press any key to stop the scanning.

Note: for Scan mode, see Menu No.16.

Channel scanning

This function can scan the channels.

1. In frequency mode, press * key for more than 2 seconds. The radio will start

scanning according to the channel you set.

2. You can change the scanning direction with the ▲/▼ keys.

3. Press any key to stop scanning.

Note: for Scan mode, see Menu No.16.

i am trying to get programming software for midland ct590s Submitted on 3-12-2021 at 18:51
Reply Report abuse
hi i have the midland c590s radio i need the programing software can you help Submitted on 2-12-2021 at 19:42
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Midland CT590S in the language / languages: English as an attachment in your email.

The manual is 6,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Midland CT590S Manual

Product: