Manual Midland CT2000 (page 33 of 38) (English)

738655

Zoom out

Zoom in

1/38

Midland CT2000 instruction guide | 29

• Enter the radio menu and follow this path:

MENUUtilitiesRadio SettingTX Inh

• Choose one of these options:

. Tx Enable: to enable the transmission

. Tx Inhibit: to disable the transmission.

• Select the desired mode and conﬁrm with MENU or PTT.

• Exit the menu and return to stand-by mode by pressing FUN.

Note 1: The selected option can dier from frequency to channel mode and from

VFO A to VFO B.

Note 2: When the transmission is disabled, if you press the PTT the led on the

mike will become but the radio won’t transmit and will emit a warning beep every 3

seconds. The display will show “TX INH”.

Acoustic sound for the secondary frequency

If CT2000 is receiving a signal on the secondary frequency (sub-vfo) you will

be warned by an acoustic sound. The main frequency (or channel) on which

you are operating is indicated by an arrow in the display.

On the secondary frequency or channel this icon does not appear.

• Enter the radio menu and follow this path:

MENUUtilitiesRadio SettingSub Ring

• Now make your selection:

. OFF: to disable the acoustic sound

. ON: to enable the acoustic sound

• Select the desired setting and conﬁrm with MENU or PTT.

• Exit the menu and return to stand-by mode by pressing FUN.

Reset

• Access the radio menu and follow this path:

MENUUtilitiesRadio SettingReset

• Now choose between:

. Factory: to make a complete reset (settings and memories)

. Setup: to reset the settings only.

• Set the desired option and conﬁrm by pushing MENU or PTT.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Midland CT2000 in the language / languages: English as an attachment in your email.

The manual is 3,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Midland CT2000 Manual

Product: