Midland CT890 instruction guide | 19
Procedure:
1. To display the name of the channels, press MENU + 21.
2. Select the desired channel, then press MENU+ 26 + MENU. The scre-
en displays eight ‘_’ symbols.
3. Edit the desired channel name with the keypad and then confirm by
pushing MENU. To exit the function press EXIT. The screen displays
the channel name and also the channel number on the right corner
of the display.
Storing channels (MEM-CH) --- MENU 27
In Frequency and in Standby mode, you can store frequencies and pa-
rameters.
Press MENU + 27; the screen will display “MEM-CH”.
Press MENU to enter the function. Press the ▲/▼ buttons to select the
channel, then press MENU to store it. A sound tone will confirm that the
storing succeeded. Press EXIT to exit to return to standby mode.
NOTES
If you want to set CTCSS tones, DCS codes or the frequency offset, you have to
do it before storing the channel.
The channels already stored are displayed in black, while the others are blue.
Deleting a channel (DEL-CH) ------ MENU 28
In standby mode, press MENU + 28; the screen will display “DEL-CH”.
Press MENU to enter the function. Press the ▲/▼ buttons or rotate the
encoder to select the channel you want to delete, then press MENU to
confirm. To return to the standby mode press EXIT.
NOTE: Channel 1 cannot be deleted.
Scan of frequencies with CTCSS/DCS (SCNCD)
MENU 29
This function enables the scan of frequencies with CTCSS or DCS codes.
When the transceiver is in receiving mode, press MENU + 29, the screen
displays “SCNCD”.
Press MENU to enter the function. Press the ▲/▼ buttons or rotate the
