Midland CT890 instruction guide | 13
SCAN function(SC-REV) - MENU 14
This transceiver has 3 Scan modes:
• TO - Time-operated Scan
Whenever a signal is detected, the radio will suspend the scan for 5 se-
conds, and then will continue to scan even if the signal is still present.
• CO: Carrier-operated Scan
Whenever a signal is detected, the radio will stop scanning. It will re-
sume to scan once the signal will be no more present.
• SE: Search Scan
The radio will stop scanning and EXIT the Scan mode once detected a
signal.
In standby mode, press MENU + 14. The screen displays “SC-REV”.
Press MENU to enter the function. Press the ▲/▼ buttons or rotate the
encoder to select the desired Scan mode, then press MENU to confirm.
To return to the standby mode press EXIT.
To start the scan keep pressed *SCAN for 2 seconds.
Receiving with CTCSS tones (R-CTCSS) - MENU 15
CTCSS tones are similar to access codes and enable the radio to commu-
nicate with the users that are tuned on the same channel and have set
the same CTCSS tone.
In frequency mode, press MENU + 15. The screen displays “R-CTC”.
Press MENU to enter the function. Press the ▲/▼ buttons or rotate the
encoder to turn OFF this function or to select a CTCSS tone from 67.0Hz
to 254.1Hz. Press MENU to confirm and EXIT to return to the standby
mode press.
NOTE: This transceiver has 50 CTCSS groups.
Transmitting with CTCSS tones (T-CTCSS) --- MENU 16
In standby mode, press MENU + 16. The screen displays “T-CTC”.
Press MENU to enter the function. Press the ▲/▼ keys or rotate the en-
coder to turn OFF this function or to select a CTCSS tone from 67.0Hz to
254.1Hz, then press MENU to confirm.
To return to the standby mode press EXIT.
NOTE: This transceiver has 50 CTCSS groups.
