579694
11
Zoom out
Zoom in
Previous page
1/36
Next page
Midland CT890 instruction guide | 7
Working modes
CT890 has 2 operating modes available: VFO (frequency mode) and MR
(channel mode).
In MR mode, the display can show:
Channel number
Frequency + channel number
Channel name
To switch from the frequency mode to channel mode can be done ma-
nually or by means of the optional programming software PRG-10.
You can also set a password for the working modes, but only by using the
optional programming software:
press MENU; the display shows
. Edit the password and press
MENU again.
If the password is composed of a series of 0, no password must be edited
to enter the working mode.
Cloning function with the optional cable cod. R73727
This function allows you to copy/transfer all data and settings from one
radio to another one; the procedure is very simple and does not need a
PC: just insert the two plugs of the cloning cable into the jack of the two
radios.
1. Connect the optional cable R73727 to both radios.
2. Turn on the radio ‘slave’ (radio to program).
3. Press PF3 key on the radio master (radio to be copied) and turn it on
at the same.
4. The red led on the radio master starts blinking and the display shows
COPYING’: the cloning function is being activated. At the end, the
led turns off and the display shows FINISHED!’; if the red led remains
steady, the cloning procedure failed.
5. On the radio slave the green led blinks while cloning and turns off
when the procedure is finished.
6. Both radios will make a reset and will be ready for use.
Battery recharge
Insert the AC plug into the 240V socket. The charger’s led starts blinking,
indicating that it is in charging stand-by. Insert the transceiver or only the
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midland CT 890 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midland CT 890 in the language / languages: English as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Midland CT 890

Midland CT 890 User Manual - German - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info