543248
17
Zoom out
Zoom in
Previous page
1/20
Next page
E N G L I S H
17
Self-Programming mode
To enter in Self-Programming mode, follow these steps:
1. while turning on the unit, hold down ‘
MONI and until ‘SELF’ is displayed;
2. press
;
3. turn the
Encoder knob and select the memory number to program;
4. push
again;
5. digit the desired rx frequency;
6. press
;
7. press
and with the Encoder knob select the desired CTCSS in RX (if you
press it again, you can select a DCS code);
8. press
;
9. digit the desired tx frequency;
10. push
;
11. press
and with the Encoder knob select the desired CTCSS in TX (if you
press it again, you can select a DCS code);
12. press
;
13. with the
Encoder knob, enable/disable the busy channel lockout (you can
choose: OFF, 1 carrier, 2 CTCSS/DCS);
14. press
;
15. by turning the
Encoder knob, you can enable/disable the priority channel
scanning;
16. press
;
17. turn the
Encoder knob and select the power level in tx H (high) or L (low);
18. press
;
19. turn the
Encoder knob and select the transmission mode: WIDE or
NARROW;
20. push
;
21. rotate the
Encoder knob and select the rst letter for the name of the
programmed channel. To switch to the next channel, push the
button
and turn the
Encoder knob;
22. press
;
23. switch off the unit to nish the programming procedure and return to the
standard modality.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midland CT 400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midland CT 400 in the language / languages: English as an attachment in your email.

The manual is 46,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Midland CT 400

Midland CT 400 User Manual - German - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info