738621
32
Zoom out
Zoom in
Previous page
1/124
Next page
UK
30 www.midlandeurope.com
Volume - button (support for stereo A2DP audio and HFP mono).
All devices paired on “Vol -” button are always active in background during
the Intercom communication. You can decide if the audio from the “Vol -”
connection is shared with other people when the intercom is open (“Public”
feature on) or if it must be private (“Private” feature on). See the “Back-
ground” paragraph above.
GPS Stereo (A2DP) voice announcement
Midland BTX2 PRO S supports Stereo (A2DP) voice announcement from
GPS Navigators or smartphone application on both “Vol+” or “Vol-” con-
nection. When connected on “Volume +” button, the GPS street voice an-
nouncements will interrupt all other communication. Only when connected
on “Vol-” the GPS voice announcements are in backgroud.
How to pair the Midland BTX2 PRO S to a GPS
In general it is possible to pair the Midland BTX2 PRO S to all the GPS for
motorbike that support Bluetooth headset connection.
To pair the Midland BTX2 PRO S to a GPS, you must first enter the setup
mode:
1. Turn o the unit
2. Press and hold down the “Middle” button about 7 sec., until the Red light is
on permanently.
3. Now press firmly (3 sec) the “Volume +” or “Volume -” button, the Blue
and Red lights will flash.
4. Enable the Bluetooth device search feature on your GPS
5. After some seconds, “Midland BTX2 PRO S” will be displayed on your GPS.
6. Follow the pairing procedure of your GPS. If a pin code is requested you
must enter “0000” (four times zero).
When successfully paired, the Blue light of the unit will be on for one second
and then the unit will exit the setup mode and switch to the working mode (the
Blue light will start flashing).
You can now use your Midland BTX2 PRO S with the GPS for street voice
announcement.
Pairing to a PMR446 radio with integrated or external Bluetooth
The PMR446 Radio can be paired to the “Volume +” or “Volume -” button.
If paired on “Volume -”, the PMR446 radio is always in the background even
when you talk on the intercom.
Pairing procedure
Turn o the unit
Press and hold down the “Middle” button about 7 sec., until the Red light is
on permanently.
Now press firmly (3 sec) the “Vol +” or “Vol -” button, the Blue and Red
light will flash.
Follow now the pairing procedure explained on the manual of the transcei-
ver itself
How to listen to the FM Radio
The FM Radio receiver is integrated inside the unit. You just need to switch to
the “FM Radio” mode in order to use it.
Long press the middle button until you hear “FM radio” from the voice an-
nouncement. Now all the three main buttons are dedicated to the FM Radio
(See Table C).
Press short the “Forward” or the “Backward” button to seek the FM Radio
station. When you press long the Forward or the Backward button, you can
scan up or down the 6 recorded stations.
A voice announcement will tell you the number of which memory you are en-
C-Radio FM mode
Mode Forward button Middle button Rear button
FM Radio Short press: seek station up
Long press: Scan recorded
Short press: On/o
Long press: Change mode
Short press: seek station up
Long press: Scan recorded
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midland BTX2 PRO S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midland BTX2 PRO S in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 9,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Midland BTX2 PRO S

Midland BTX2 PRO S Installation Guide - English, German, French, Italian, Spanish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info