Manual Midland BTX2 FM (page 18 of 88) (English, German, French, Italian, Portuguese, Spanish)

579660

Zoom out

Zoom in

1/88

Midland BTX2 FM - 17

› Intercom mode (if another unit has been paired)

› FM Radio

› Phone mode (if a phone has been paired)

Every time you turn on the unit, the default mode is Intercom (if it was previously

paired to another unit), otherwise it will be Phone (If was paired to a phone).

If you need to know in which mode the unit currently is, just press the “Volume +

“ and “Volume –“ button together. A voice announcement will tell you the current

mode.

Maximum Distance

You can reach 800mt intercom distance if the ﬂip up antenna is up and if you are

in line of site without obstructions and interferences (the riders must be always

in sight).

How to pair two BTX2 FM unit

The two units supplied in the same BTX2 FM box, are already paired and ready to

use, which mean you don’t need to perform this procedure. The unit are already

paired using the Middle button.

If the devices are not part of the same kit, or the units has been purchased sepa-

rately, you need to ﬁrst pair it in order to use it.

To pair the BTX2 FM to another BTX2 FM unit

To pair the BTX2 FM to another BTX2 FM unit, you must ﬁrst enter the setup mode:

1. Turn oﬀ the unit

2. Press and hold down the middle button about 7 sec., until the Red light is on

permanently.

3. Now press the Middle button for 3 seconds. The Blue and Red light will ﬂash.

4. Do the same procedure on the other unit, When successfully paired, each unit

will have the Blue light on for one second and than go back to the setup mode

(Red light always on).

5. Now the pairing procedure is complete, you just need to exit the setup mode

before you can use the units:

6. Double click on the Middle button, the Red light will turn oﬀ and the Blue

light will start ﬂashing.

You can use now your BTX2 FM.

How to use the Intercom

To use the intercom feature, be sure the both units are turned on and correctly

paired together.

Manual activation

Press the Middle button on one of the two units. Communication is enabled and

remains active until you press again the middle button. The intercom need some

second to activate, you will hear a beep tone when the intercom is open.

Voice activation (VOX)

Simply start talking, after some seconds the communication will be opened and

will remain active for the time you are talking. If there is no conversation the

intercom will be closed after 40 seconds. If needed you can close the intercom

manually without waiting 40 seconds (just press the middle button).

Attention: The Voice activation (VOX) can open the intercom communication only

to the unit that was paired with the Middle button. If you chose to use a diﬀerent

button, you will be able to active the intercom only manually.

If needed, you can disable the VOX feature simply by pressing the Backward but-

ton for 7 sec. A voice announcement will advise you when the VOX is disabled.

To turn the VOX on again, just press the same button and a voice announcement

will advise you that the VOX is now active. This setting is remembered also if you

turn oﬀ the unit

Adjusting the volume

Your Midland BTX2 FM uses AGC technology, which automatically adjusts the

listening volume in relation to background noises.

However, it is also possible to manually adjust the volume by means of the “Volu-

me +” and “Volume -“buttons.

Attention: volume can be adjust only when an audio connection is active.

Attention: the volume buttons (Vol + and Vol -) cannot be used to adjust the vo-

lume of the wired audio source. The AGC system with automatically increase the

volume on higher speed.

Compatibility with other Midland BT line units

The BTX2 FM is compatible with BT Next Conference and BTX1 FM.

When paired the max distance of the intercom is deﬁned from the lower possible.

The BTX2 FM is compatible with the previous line of Midland BT (BT Next, BTX2

and BTX1) only if updated to ﬁrmware version 2014.

How to pair BTX2 FM to more than 2 units

One BTX2 FM unit can be paired to maximum three other BT unit, that means

4 in total (three Midland unit + one Talk2All). You can use the Middle and the

Backward button to pair to a Midland unit and you can use the “Forward” button

to pair the “Talk2All-Universal Intercom” feature.

The same button you will use to pair the unit will be also used to open/close the

intercom communication.

For example you can pair your passenger to the Middle button and another mo-

torbiker to the Backward button.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Midland BTX2 FM in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 9,13 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Midland BTX2 FM Manual

Product: