Manual Midland BTX1 PRO 2020 (page 13 of 42) (English, German, Dutch, French, Italian, Spanish)

738680

Zoom out

Zoom in

1/42

10 www.midlandeurope.com www.midlandeurope.com 11

FM Radio with intercom

When you are in “FM Radio” mode is not possible to manually open the intercom, you

can only open it using VOX feature (just talk) to the unit paired on the “Middle” button.

To manually activate the intercom you must switch to “Intercom” mode.

How to Disable/Enable the FM Radio

By default the FM radio is on.

Disabling:

› Enter the “Setup” mode: turn o the unit and hold down the “Middle” button about 7

sec., until the Red light is on permanently.

› Press “Middle” and “Volume+” buttons together for 3 seconds. The blue LED will ﬂash

three times.

› Double click on the “Middle” button to exit the “Setup” mode and use the BTX1 PRO.

Enabling:

› Follow the same procedure up described; now the blue LED will ﬂash once.

› To exit the “Setup” mode, double click the “Middle” button.

Pairing to a PMR446 radio with integrated or external Bluetooth

The PMR446 Radio can be paired to the “Volume +“ or “Volume -” button. If paired on

“Volume -” and the “Background” feature is activated, the PMR446 radio is always in the

background even when you talk on the intercom.

Pairing procedure

› Turn o the unit

› Press and hold down the “Middle” button about 7 sec., until the Red light is on per

manently.

› Now press ﬁrmly (3 sec) the “Vol +” or “Vol -” button, the Blue and Red light will ﬂash.

› Follow now the pairing procedure explained on the manual of the transceiver itself.

Setup and special conﬁgurations

Resetting all paired devices

Sometimes you may ﬁnd it necessary to delete all the pairing references stored in the

BTX1 PRO unit (reset operation).

To perform this operation you must ﬁrst enter the setup mode:

› Turn o the unit

› Press and hold down the “Middle” button about 7 sec., until the Red light is on per

manently.

› Then simultaneously press and hold down the “Volume +” and “Volume –“ buttons for

3 seconds. The Blue Light will be lit on for 1 sec and then back to steady RED.

› Double click on the “Middle” button to exit the “Setup” mode and use the BTX1 PRO.

This procedure deletes all the paired Bluetooth devices stored in the memory therefore

you will not have “Phone” and “Intercom” mode, only “FM Radio” mode will be available.

Back to factory setting

Sometimes you may ﬁnd it necessary to go back to the factory setting, to reset all the

changes/setup already made and have a “clean” unit.

To perform this operation you must ﬁrst enter the setup mode:

› Turn o the unit

› Press and hold down the “Middle” button about 7 sec., until the Red light is on per

manently.

› Then simultaneously press and hold down all the three buttons “Forward”-“Midd

le”-“Backward” for 3 seconds. The Blue Light will be lit on for 1 sec and than back to

steady RED.

› Double click on the “Middle” button to exit the “Setup” mode and use the BTX1 PRO.

Radio FM mode

Mode Forward button Middle button Backward button

FM Radio Short press: seek station up

Long press:

Scan recorded

Short press: On/o

Long press: Change mode

Short press: seek station down

Long press:

Scan recorded

This procedure deletes all the paired Bluetooth devices stored in the memory therefore

you will not have “Phone” and “Intercom” mode, only “FM Radio” mode will be available.

Adjusting/ Disabling the VOX feature (Intercom and telephone)

The Intercom feature can be enabled both manually and vocally (VOX). The VOX activa-

tion is inﬂuenced by the background noise and therefore by the speed and wind.

For optimum results, it is possible to choose one of the following four microphone sen-

sitivity levels: high, medium, low and very low. The default setting of BTX1 PRO is “me-

dium”. It is also possible to disable the VOX feature in order to activate the Intercom and

phone call answering features in manual mode only.

Adjusting the sensitivity of the microphone (VOX)

To perform this operation you must ﬁrst enter the setup mode:

1. Turn o the unit

2. Press and hold down the “Middle” button about 7 sec., until the Red light is on per-

manently.

3. Your BTX1 PRO is now in “Set up mode”.

4. Press shortly the “Backward” button, the red light indicator changes to a steady blue.

5. Now, press “Volume +” or “Volume -“ to increase or reduce sensitivity. Every time you

press the Volume buttons the RED light will ﬂash for conﬁrmation. When you reach

the end of the upper and lower limit, the RED light will not ﬂash.

6. Press again the “Backward” button; the Blue light will ﬂash several times, in order to

let you know the selected sensitivity:

One ﬂash = VOX disabled

Twice = low sensitivity

3 times= normal sensitivity

4 times= high sensitivity (default setting)

5 times = highest sensitivity

The light indicator is back to RED (“Set up mode”) and the changes are conﬁrmed.

7. If needed, you can adjust again the sensitivity repeating the steps from point 1,

otherwise exit the Setting mode by double clicking the “Middle” button. Once the red

light turns o, the blue led starts blinking. Now you can use your BTX1 PRO.

Disabling the VOX feature (Intercom and telephone)

Follow all the procedure described in the previous steps and choose the option of only

one ﬂash (VOX disabled).

Wired connection always in background

This feature let you keep the wired connection always on, even when the phone or the

intercom is open (but not when you are in FM radio mode).

By default the Background feature is ON.

Disabling:

› Enter the “Setup” mode:

› Turn o the unit

› Press and hold down the “Middle” button about 7 sec., until the Red light is on per

manently.

› Press the “Forward” and “Middle” button together for 3 seconds. The blue LED will

ﬂash three times.

› Double click on the “Middle” button to exit the “Setup” mode and use the BTX1 PRO.

Enabling:

Follow the same procedure up described; now the blue LED will ﬂash once.

To exit the “Setup” mode, double click the “Middle” button.

Setup and Firmware update

It is possible to conﬁgure and update the ﬁrmware of your BTX1 PRO using the USB

connection to your PC. On the Midland web site www.midlandeurope.com in the BTX1

PRO page you can ﬁnd the PC software and the new ﬁrmware updates if available.

ATTENTION DO NOT CONNNECT THE UNIT TO THE PC BEFORE you DOWNLOAD

AND INSTALL THE SOFTWARE

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Midland BTX1 PRO 2020 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4,51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Midland BTX1 PRO 2020 Manual

Product: