Manual Midland BTX1 PRO 2020 (page 10 of 42) (English, German, Dutch, French, Italian, Spanish)

738680

Zoom out

Zoom in

1/42

4 www.midlandeurope.com www.midlandeurope.com 5

Boom Microphone

Place the section with the Velcro/adhesive strip between the padding and the rigid cover

of the helmet, so that the microphone is correctly positioned in front of your mouth and

that the white symbol is facing your mouth. This type of microphone is suited for Open

Faced and Flip Front helmets.

Wired microphone

Using the Velcro/adhesive strip, place the microphone inside the helmet in front of your

mouth. This type of microphone is more suited for Full Faced helmets. The mini con-

nector on the microphone allows you choose the microphone that best suits the helmet

you are using.

Description of the Slide-in mounting kit

To ﬁx the Midland BTX1 PRO onto the helmet, you have to install the slide-in mounting

kit by using the plate with bi-adhesive strip. This method allows you to safely “ﬁx” the

BTX1 PRO unit onto your helmet and to remove it at any time in order to recharge or

store it.

Plate with bi-adhesive strip

The Bi-adhesive plate is already assembled on the slide-in mounting kit.

Clean the application area on the helmet surface, remove the bi-adhesive ﬁlm and place

the ﬁxing plate on the left side of the helmet by keeping it contact with the surface for

a few seconds.

Fitting and removing your Midland BTX1 PRO

The BTX1 PRO can be easily ﬁtted onto the helmet by sliding it downwards on the sliding

mounting kit. BTX1 PRO is maintained in position thanks to the ﬁxing clip located on the

upper section (A). To detach the BTX1 PRO, simply press the ﬁxing clip and push the

unit upwards.

UnlockLock

Bi-adhesive

Switching ON and OFF your Midland BTX1 PRO

Switching the unit on:

Press and hold “Middle” button for approximately 3 seconds until the BLUE indicator

lights.

Switching the unit o:

Press and hold both “Middle” and “Backward” buttons together for approximately 3 se-

conds until the RED indicator ﬂashes 3 times, thus lessening the chances that you might

turn o the unit accidentally (especially whilst wearing gloves).

Operative “mode”

The BTX1 PRO can operate in three main “mode”: Intercom, Phone and FM Radio.

The 3 multi function buttons can have dierent functionality depending on which mode

the unit is at that moment.

› In “Intercom mode” the three buttons let you manage the Intercom communications

between driver and passenger or bike to bike.

› In “Phone mode” you can manage your Bluetooth mobile phone to place/answer a

phone call or to listen to the music or GPS App. announcement (in stereo mode).

Please use your phone responsibly and safely.

› In “FM Radio mode” you can listen to your favourite radio station in stereo, seek for a

speciﬁc radio station and save it (6 memories are available).

You can switch (toggle) from one mode to the other simply pressing the Middle button

for 3 seconds. A voice announcement will tell in which mode you are on.

The toggle sequence is the following:

› Intercom mode (if another unit has been paired)

› FM Radio

› Phone mode (if a phone has been paired)

Every time you turn on the unit, the default mode is the last used mode.

The Intercom mode and Phone mode are avalaible only if it was previously paired to

another unit or to a phone.

If you need to know in which mode the unit currently is, just press the “Volume + “ and

“Volume –“ button together. A voice announcement will tell you the current mode.

How to pair two BTX1 PRO units

The two units supplied in the same BTX1 PRO box, are already paired and ready to use,

which means you don’t need to perform this procedure. The units are already paired using

the Middle button.

If the devices are not part of the same kit, or the units have been purchased separately,

you need to ﬁrst pair it in order to use it.

To pair the BTX1 PRO to another BTX1 PRO unit

To pair the BTX1 PRO to another BTX1 PRO unit, you must ﬁrst enter the setup mode:

1. Turn o the unit

2. Press and hold down the middle button about 7 sec., until the Red light is on perma

nently.

3. Now press the Middle button for 3 seconds. The Blue and Red light will ﬂash.

4. Do the same procedure on the other unit, When successfully paired, each unit will

have the Blue light on for one second and then go back to the setup mode (Red light

always on).

5. Now the pairing procedure is complete, you just need to exit the setup mode before

you can use the units:

6. Double click on the Middle button, the Red light will turn o and the Blue light will

start ﬂashing. You can use now your BTX1 PRO.

How to use the Intercom

To use the intercom feature, be sure that both units are turned on and correctly paired

together.

Manual activation

Press the Middle button on one of the two units in “Intercom” mode. Communication is

enabled and remains active until you press again the middle button. The intercom need

some second to activate, you will hear a beep tone when the intercom is open.

Voice activation (VOX)

Simply say something, after some seconds the communication will be opened and will

remain active for the time you are talking. If there is no conversation the intercom will be

closed after 40 seconds. If needed you can close the intercom manually without waiting

40 seconds (just press the middle button).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Midland BTX1 PRO 2020 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4,51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Midland BTX1 PRO 2020 Manual

Product: