543246
17
Zoom out
Zoom in
Previous page
1/28
Next page
16 - Midland BTX1 FM
UK
Description of the installation brackets
The Midland BTX1 FM can be xed onto the helmet in two dierent ways: By ei-
ther using the plate with bi-adhesive strip, or the clamp. These methods allow you
to safely “x the BTX1 FM unit onto your helmet and to remove it at any time in
order to recharge or store it.
Plate with bi-adhesive strip
The xing plate has a bi-adhesive strip on one of
its sides. To x the plate in place, clean the appli-
cation area on the helmet surface, remove the bi-
adhesive lm and
place the xing plate on the helmet by keeping it
contact with the surface for a few seconds.
Screw Clamp
Using the Allen Key, loosen the two screws on the clamp and place the Backward
plate between the helmet padding and the external rigid protection. Then,
tighten the two screws in order to rmly x the clamp in place. Inside the clamp is
included a small plastic spacer that can be removed to give a tighter t if required.
Fitting and removing your Midland BTX1 FM
The BTX1 FM can be easily tted onto the helmet by sliding it downwards so that
it ts into the slot of the selected xing device (plate with bi-adhesive strip or
clamp). BTX1 FM is maintained in position thanks to the xing clip located on
the upper section (A).
To detach the BTX1 FM, simply press the xing clip and push the unit upwards.
Switching your Midland BTX1 FM on and off
Switching the unit on:
Press and hold “Middle” button down for approximately 3 seconds until the BLUE
indicator lights.
Switching the unit off:
Press and hold both “Middle” and “Backward” buttons together for approximately
3 seconds until the RED indicator ashes 3 times, thus lessening the chances that
you might turn o the unit accidentally (especially whilst wearing gloves).
Operative “mode”
The BTX1 FM can operate in three main mode”: Intercom, Phone and FM Radio.
The 3 multi function buttons can have dierent functionality depending on which
mode the unit is at that moment.
In “Intercom mode the middle buttons let you manage the communications
between driver and passanger
In “Phone mode” you can manage your Bluetooth cellular phone to place/
answer a phone call or to listen to the music (in stereo mode). Please use your
phone responsibly and safely.
In “FM Radio mode” you can listen to your favourite radio station in stereo,
seek for a specic radio station and save it (6 memory are available).
You can switch (toggle) from one mode to the other simply pressing the Middle
button for 3 seconds. A voice announcement will tell in which mode you are on.
The toggle sequence is the following:
Intercom mode (if another unit has been paired)
FM Radio
Phone mode (if a phone has been paired)
Every time you turn on the unit, the default mode is Intercom (if it was previously
paired to another unit), otherwise it will be Phone (If was paired to a phone).
If you need to know in which mode the unit currently is, just press the “Volume +
“ and “Volume –“ button together. A voice announcement will tell you the current
mode.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midland BTX1 FM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midland BTX1 FM in the language / languages: English, Italian as an attachment in your email.

The manual is 2,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info