543241

Midland BT Remote Manual

7
Zoom out
Zoom in
Previous page
1/41
Next page
UK
Midland BT Remote - 7
Switching your Midland BTRemote on and off:
Switching the unit on:
Press and hold “Middle” button down for approximately 3 seconds until the BLUE
indicator lights up.
Switching the unit off:
Press and hold both “Middle” and “Backward” buttons together for approximately
3 seconds until the RED indicator flashes 3 times, thus lessening the chances that
you might turn off the unit accidentally (especially whilst wearing gloves).
Operative mode
Midland BTRemote replicates exactly the same functions as the 5 buttons avai-
lable on the BT Next, BTX1 and BTX2 intercom, therefore you can refer to the
intercom manual.
How to pair the BTRemote
Midland BTRemote can be paired to the following intercoms: BTNext, BTX1 and
BTX2.
First time pairing
The BTRemote is ready to be paired just out of the box:
› Turn on the BTRemote (Press and hold “Middle” button down for 3 seconds,
the blue light will start flashing)
› Turn on the intercom (BTNext, BTX1, BTX2)
› Press any button on the BTRemote ( you must do it within 3 minutes after you
turned on the intercom unit)
The two devices will search for each other and they will automatically pair.
Once the pairing procedure is completed, it does not to be repeated again, becau-
se the BTRemote will automatically recognize the paired unit.
If the pairing procedure fails, just repeat the procedure again. In case the pairing
still does not work, perform first a reset (see the “How to reset the pairing” para-
graph) and than repeat the procedure.
Using the BTRemote
To use the BTRemote, simply switch it on and press any button (make sure that
the intercom is on). This ensures the connection and as soon as the blue light
starts double flashing, you can start using it.
How to reset the pairing
Sometimes you may find it necessary to delete all the pairing references stored in
the BTRemote unit (reset operation):
› Turn off the unit
› Press and hold down the “Middle” and the “Volume +” buttons together, until
the Blue light turn on steady.
› Release the buttons and the blu light will start flashing
Now all the pairing information are deleted and it is possible to start a new pai-
ring session (as explained in the paragraph “First time pairing”):
› While the blu light is flashing, just turn on the intercom unit (BTNext, BTX1,
BTX2)
› Press any button on the BTRemote ( you must do it within 3 minutes after you
turned on the intercom unit)
The two devices will search for each other and they will automatically pair.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midland BT Remote at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midland BT Remote in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish, Finnish as an attachment in your email.

The manual is 1,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info