579651

Midland BT NEXT CONFERENCE Manual

25
Zoom out
Zoom in
Previous page
1/118
Next page
24 - Midland BT Next
UK
Conference
The “Conference” mode allows the communication with four people simulta-
neously. The BT Next C. Conference unit can work as usually, with “one to one”
communication up to 6 people (“classic” Intercom mode) or with 4 people confe-
rence intercom (Conference mode).
How to use the conference mode
First of all you need to pair all the units in a “chain” mode, second the “Conference”
feature must be active on all the units paired.
Pairing
To use the conference mode you need to pair all the units in a “chain” congura-
tion. The BWD button of the rst unit must be paired to the FWD button of the
second unit. The BWD button of the second unit must be paired to the FWD button
of the third unit and so on, till the fourth!
The rst and the last unit must not be paired together (the chain must stay open).
The unit number 1 can talk to the last unit (number 4) only “through” the unit
number 2 and number 3. That means to have the conference with four people, all
the unit must have the intercom open.
Activate Conference mode:
In “Intercom Mode” and no active audio, keep pressed the FWD button for 7 sec.
The voice announcement “Conference” will tell you that it is active.
Disable Conference mode:
In “Intercom Mode” and no active audio, keep pressed the FWD button for 7 sec.
When in Intercom mode the voice announcement “Intercom” will tell you that you
are back to the standard Intercom functionality.
When the Conference mode is active, only two mode are available:
Conference (that replace the Intercom mode) and FM radio.
There is no more the “Phone” mode because all the devices paired on Vol+ and Vol
– are temporary disconnected to guarantee the stability of the conference mode.
Attention: when the “conference” mode is active, the “Talk2All- Universal Intercom”
(to talk with not Midland brand intercom) is not available.
Also if one unit was paired on the CTRL (middle) button, it is temporary unavaila-
ble, you need to disable the “Conference” mode and go back to the standard “one
to one” Intercom mode.
How to use the conference mode
When the conference mode is active, is possible to open the intercom communi-
cation pressing both the FWD and BWD button. One click on the button will open
the intercom communication, one click on the same button will close it.
The two units that are in the middle of the chain (unit 2 and 3) must keep the
intercom open on both FWD and BWD button to allow the full communication of
the four units together.
Disable the “conference” mode
The conference mode can be disable in every moment, just pressing the FWD
button for 7 sec. You will hear the voice announcement “Intercom” and from that
moment your BT Next C. Conference will start working with “one to one” intercom
and all the devices paired on Vol+ and Vol- are back, together with the “Phone”
mode and the “Talk2All-Universal intercom” feature.
“One Click Talk” function
When the conference mode is active, is possible to open the intercom communi-
cation to all the 4 users just in “one click”. Press short the CTRL (middle) button and
you will automatically open the conference intercom to all the unit connected.
Talk 2 All - Pairing to a different brand intercom.
Thanks to the “Talk2 All - Universal Intercom” feature it is now possible to pair your
BT Next C. to a dierent brand intercom available on the market.
You can pair a maximum of two not Midland Intercom, one on the “Forward” but-
ton and one on the “Backward” button.
• On the BT Next C. enter the setup mode: (with the unit OFF press and
hold down the Middle button about 7 sec. until the Red light is on
permanently).
• Keep pressed the “Forward” button or the “Backward” button for 7
seconds: the Red and Blu LED light will start ashing fast, than (while
you still keep the button pressed) the Red and Blu LED light will change
to slow ashing. Now you can stop pressing the button.
Talk2All - Universal Intercom
Not Midland Unit
Talk2All - Universal Intercom
Midland Unit paired as a phone
Passenger
1 2 3 4
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midland BT NEXT CONFERENCE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midland BT NEXT CONFERENCE in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 12,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info