Manual Midland BT City 2013 (page 4 of 9) (English)

543239

Zoom out

Zoom in

1/9

Making a call

There are several ways to make a call.

From the mobile keypad:

› Dial the number on the mobile keypad:

› Press “Send” on the mobile phone.

To redial the last number:

› Press and hold “Volume+” button for 3 seconds in order to redial

the last number (you will hear one audio conrmation tone).

To make a voice call:

› Press “Volume-” button for 3 Seconds. If your mobile phone

supports voice calls, you will be asked to speak the name of the

contact you wish to call.

Priority: Calls have a high priority, which means that all other commu-

nications are temporarily disabled when a call arrives and automatically

re-enabled once the call ends.

Ending a call

There are several ways to end a call:

› Wait for the called person to end the call.

› Press the “Control” button for 3 seconds (you will hear an audio

conrmation tone).

› Press “End” button on the mobile phone.

Using the MP3 player feature of the mobile phone

Many mobile phones are now designed to be used as stereo MP3

players. The BTCity device fully supports the A2DP and AVRCP proto-

cols that enable you to listen to stereo music and remotely control

your mobile phone’s MP3 player. You can even use the buttons on the

BTCity unit to control the following play options: Play, Pause, Forward

and Backward.

Available controls:

› To play/pause music: click the “Control” button.

› To skip forward to the next song: keep pressed the “Volume+”

button.

› To skip backwards to the previous song: keep pressed the

“volume-“ button.

Priority: the music listening mode has the lowest priority. Therefore, it

will always be disabled when another type of communication is ena-

bled.

Pairing to a GPS navigator

The GPS can be paired to the “Volume + “ or ”Volume -” button. If

the GPS is paired on “Volume +”, the street voice announcement will

interrupted all the other communications (Intercom, Music). If the

GPS is paired on “Volume -“ all the street announcement will be in

background (and will not interrupted the Intercom communications).

Attention: If you need to connect both Phone and GPS, you must pair

the GPS to the “Volume +“ button and the Phone to the GPS it self (not

anymore to the “Volume -” button). In this case the GPS street voice an-

nouncement and the phone calls are always in background and will not

interrupt the Intercom conversation.

Attention: remember to switch o all the other Bluetooth device, only

the two devices involved in the pairing must be turned on.

GPS voice announcement

When the GPS is paired to the “Volume +” button,(high priority) the

street voice announcement will always interrupt the intercom.

When paired using the “Volume -” button, (lower priority) the voice

announcement are always in background also if the intercom is active.

AUX wired connection

Music or audio from the AUX wired connection, by default it is always

in the background also when the intercom is open or during a phone

call. It is possible to change this beaver following the procedure de-

scribed in the “Setup and Special conguration” chapter.

Pairing to other Bluetooth devices

The BTCity unit can be paired to other Bluetooth devices, like Phone,

GPS Navigator or PMR446 Radio with built-in or external Bluetooth.

The pairing procedure must be done using the “Volume +” or the

“Volume -“ buttons.

› Pairing to the “Volume +” button: for Phone with music

(A2DP stereo).

› Pairing to the “Volume -” button: for GPS navigators and other

devices which the audio must be always in background.

Attention: The “Volume -” button does not support the pairing with a

phone and do not support A2DP Stereo Music.

Using the telephone features

The cellular phone can be paired only to the “Volume +”, in this way

it is possible to manage all the phone functionalities and listen to the

stereo music. An incoming call has the higher priority, that means all

other communications will be closed (Intercom, Music).

Pairing the unit with a mobile phone

1. Enable the Bluetooth device search feature on your mobile phone.

As this procedure varies according to the brand and model of the

mobile phone, refer to the manual supplied to your particular pho-

ne for further information.

2. Press and hold down the middle button about 7 sec., until the Red

light is on permanently (setup mode). Now press for 3 seconds the

“Volume +” button, the Blue and Red light will ash.

3. After a few seconds the mobile phone will display “Midland BTCi-

ty”. Select it and follow the instructions provided in your mobile

phone manual to accept the pairing. When prompted, enter the

pairing code, which is 0000 (four zeroes). Your mobile phone

should then display a conrmation message if the pairing opera-

tion has been successfully completed

4. The BTCity will automatically exit the set up mode (red indicator

on) and go to the working mode (blue light ashing).

Answering a call

When you hear the phone ring, you can answer in two dierent ways:

Vocally:

Simply say one word to answer the call and start talking.

Manually:

Tap the “Control” button and start speaking.

Rejecting a call

If you don’t wish to answer, you can let the mobile phone ring or press

the “Control” button for 3 seconds (you will hear one audio conrma-

tion tone).

Volume+

forward

Volume -

backward

Control

Pause/Play

› GPS

› PMR446 Radio

› Phone (GPS)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Midland BT City 2013 in the language / languages: English as an attachment in your email.

The manual is 3,21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Midland BT City 2013

Midland BT City 2013 User Manual - English - 16 pages

Midland BT City 2013 User Manual - German - 19 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Midland BT City 2013 Manual

Product: