232762

Midland bt 1 intercom twin set Manual

11
Zoom out
Zoom in
Previous page
1/21
Next page
11
English
passenger will now be able to listen to the same informa-
tion/music that the rider hears. To return to the private mode,
press the “Intercom” button once more.(you will hear two au
-
dio confirmation tones).
Using the wired audio input
Your Midland BT1 is also fitted with a wired audio input (labe-
led AUX), that can be used to connect a stereo audio source,
like an iPod (or any other MP3 Player) or a GMRS transceiver
for bike-to-bike communications.
Priority: the wired audio input has the lowest priority
when compared to the other Bluetooth connections (in
-
cluding the Intercom) and will therefore always be disa
-
bled when another Bluetooth communication is opened.
Listening to music
To listen to music from the wired input, connect the audio
source using the cable supplied with the BT1 unit. The volu
-
me level is automatically adjusted by the AGC system, which
means that you only need to adjust the volume of your iPod/
MP3 player to a level that will allow you to listen to music in
normal speed.
Attention: never set the volume of the MP3 Player to the
maximum possible.
Hint: We recommend that you perform a few tests adjusting
the volume of your iPod/MP3 player so at the normal speed
the Headset volume is suited to your needs.
The AGC system will automatically increase the volume on
higher speed. Make a note to remember this setting for future
trips.
Attention: the volume adjustment, (“Volume+” and “Vo
-
lume –“) buttons, cannot be used to adjust the volume of
the wired audio source(eg MP3 player), only the volume
of the BT1 that the device is connected to.
Enabling/disabling the wire input
The wire input can be enabled and disabled by means of the
“AUX” button.
› Disabling: briefly press the “AUX” button (you will hear two
audio confirmation tones).
› Enabling: briefly press the “AUX” button (you will hear one
audio confirmation tone).
Using a Two Way Radio transceiver
To be able to use the transceiver, it is necessary to purchase
a specific cable (sold separately) in order to connect the radio
to your Midland BT1:
› Note: Some manufacturers radios use a different pin
configuration, so we recommend that you ask your
dealer as to which cable is best suited to your needs
To communicate via the attached radio, press the transmis
-
sion Press To Talk (PTT) button to speak and release it to
listen. It is not possible to talk and listen simultaneously. The
cable connected to the transceiver has a PTT button that can
be placed on the handlebar of your bike or held in your hand
(If you are the passenger rider).
Adjust the volume of the transceiver to your needs, remem
-
bering that the volume adjustment is controlled by the auto
-
matic AGC system and that it will therefore be automatically
increased in relation to background noise.
Special configurations
Some Midland BT1 features can be configured to suit the
specific needs of bikers.
› Permanently enable 3-way communications
› Voice enable Intercom (VOX)
Adjust the microphone sensitivity
Disable the VOX feature
Permanently enabling 3-way communications
The music coming from the wired connection is interrupted by
default when the Intercom feature is enabled.
By enabling this feature, what is heard from the wired con
-
nection is not interrupted but switched to the passenger’s
device.
This feature can be useful, for example, if you wish to main
-
tain Intercom communications and simultaneously talk using
a transceiver radio connected with a wired connection.
In addition it also allows you to share the music between
Rider and Passenger. Considering that the music quality is
“mono” for the second person who will share the music (see
the chapter “Share the music between driver and passenger”
below).
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midland bt 1 intercom twin set at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midland bt 1 intercom twin set in the language / languages: English as an attachment in your email.

The manual is 1,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Midland bt 1 intercom twin set

Midland bt 1 intercom twin set User Manual - German, French, Italian, Portuguese, Spanish - 118 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info