Manual Midland bt 1 intercom twin set (page 7 of 21) (English)

232762

Zoom out

Zoom in

1/21

English

Pairing with Bluetooth devices

Your Midland BT1 is a Bluetooth unit that can be paired with

other Bluetooth devices.

Before performing this procedure, it is necessary to set BT1

into “Pairing mode” (Setup).

The only operations permitted in this mode are the pairing

ones. To use the BT1 unit after pairing it with the desired de

vices, it is necessary to quit the “Setup” mode and switch to

the “Operating” mode.

Setup mode

Switch off the BT1 device. Press and hold down the central

button (Intercom/on) for about 7 sec. until the red indicator

switches on permanently. BT1 is now in “Setup” mode and

can therefore be paired with other devices.

Pairing the unit with the passenger’s device

The two units supplied in the kit, are already paired and

ready for use, which means that it is not necessary to

perform this procedure.

If the devices are not part of the same kit, you need to pair

them in order to be able to use the Intercom function.

Place both BT1 units in Setup mode (red indicator permanen

tly on) Press the “Volume +” button on the ﬁrst unit until the

RED and BLUE lights begin to ﬂash rapidly and alternately.

Then press the “Volume –“button on the second unit until the

RED and BLUE lights begin to ﬂash rapidly and alternately.

Now both BT1 units are trying to pair to each other.

When successfully paired, each device will light the BLUE

light for 1 sec and go back to setting mode (red light always

on) waiting for additional pairing or setting procedures.

Pairing the unit with a cell phone - only for

the driver’s device

1. Enable the Bluetooth device search feature on your mobile

phone. As this procedure varies according to the brand and

model of the mobile phone, refer to the manual supplied to

your particular phone for further information.

2. Set the BT1 unit in “Setup” mode, then press the “Phone”

button on the unit until the red and blue indicators start

ﬂashing.

3. After a few seconds the cell phone will display “Midland

BT1”. Select it and follow the instructions provided in your

mobile phone manual to accept the pairing. When promp

ted, enter the pairing code, which is 0000 (four zeroes).

Your cell phone should then display a conﬁrmation mes

sage if the pairing operation has been successfully com

pleted (In case of error message, complete anyway the

procedure, exit the “setup” mode and try to use the BT1

with your phone).

4 The BT1 unit returns to the Setup mode (red indicator per

manently on) to indicate that it is ready to be paired with

other devices

If you pair the BT1 unit with a cell phone, you will not be able

to pair it with a GPS Sat-Nav, because both these devices are

assigned (high) priority 1.

This problem can be easily solved by pairing your cell phone

directly with your GPS Sat-Nav and then pairing the GPS with

your Midland BT1 using the above procedure. In this case, the

cell phone features will be managed by the GPS Sat-Nav.

Pairing the unit with a GPS Sat-Nav - only for

the driver’s unit

It is generally possible to pair the BT1 unit with all GPS Sat-

Navs that support Bluetooth earpieces.

Midland BT1 has been successfully tested for use with GPS

ZUMO Sat-Navs manufactured by Garmin and TOMTOM Ri

der 1 and 2 Sat-Navs.

1. On your GPS Sat-Nav, enable the Bluetooth earphone

search feature. As this procedure varies according to the

brand and model of GPS, we recommend you refer to the

manual supplied with your GPS Sat-Nav for further infor

mation.

2. Ensure that the BT1 is in Setup mode (Red light on) &

Press the “Phone” button on the BT1 unit until the red and

blue indicators start to ﬂash.

3. After a few seconds the GPS Sat-Nav will display “Midland

BT1”. Select it and follow the instructions provided in the

GPS Sat-Nav manual to accept the pairing. When promp

ted, enter the pairing code, which is 0000 (four zeroes).

The GPS should then display a conﬁrmation message if

the pairing operation has been successfully completed.

4. The BT1 unit returns to the Setup mode (red indicator per

manently on) to indicate that it is ready to be paired with

other devices.

If you pair the BT1 unit with a GPS Sat-Nav, you will not be

able to pair it with a cell phone, because both these devices

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Midland bt 1 intercom twin set in the language / languages: English as an attachment in your email.

The manual is 1,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Midland bt 1 intercom twin set

Midland bt 1 intercom twin set User Manual - German, French, Italian, Portuguese, Spanish - 118 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Midland bt 1 intercom twin set Manual

Product: