Manual Midland Albrecht AE600S (page 6 of 16) (English, German, Dutch, French)

543220

Zoom out

Zoom in

1/16

Declaration of Conformity:

The motorbike communication system fits in conformity with the European EMC standards, such as EN 55

013:2001 + A1:2003 (Radio), EN 301 489-01 V.1.6.1, EN 301 489-05 V 1.3.1, EN 301 489-07 V 1.3.1, EN

55022:2006, EN 55024:1998 with A1+A2(2003), WEEE / RoHS, EN 60065:2002 + A1 (2006) (electric

safety) and it carries the CE- mark. The actual EC declaration of conformity can be downloaded from

www.hobbyradio.de

Conditions for accessory connection

Radio connection (red colour coded cable and socket):

The radio connection of the

AE 600 S

fits to most of PMR with 2.5 mm / 3.5 mm plug combination such as ALAN 443,

ALAN 456R, HP 446, Midland G7 / G 12 or Albrecht Tectalk Pro. The universal duo plug (2.5 mm for microphone and

3.5 mm for the ear set) is being supported by many other radios. It is not intended to use the VOX-function because of

the high level of surrounding noise does not allow a perfect speech switching, which is essential for simplex 2 way radio

communication (different from duplex GSM use!). Some smaller size radios are using now more and more a

2.5 mm

stereo socket instead of a duo plug. For such radios you will need an additional adapter 29254, or you can use the

supplied GSM cable, because this cable will also fit to this kind of radios. You may use the GSM cable in that case (but

connected to the PMR socket). Of course this alternative solution is only possible if you should not need the GSM

connection at the same time.

PTT (Push - To - Talk switch): insert the green marked cable plug of the PTT into the green marked PTT socket.

MP-3/Music CD:

3.5 mm stereo plug (9). The radio is being switched off, when the cable is being inserted. Use the Headphone-Output of

the unit for this feature. The volume shall be adjusted by the volume control of the MP-3/Musik CD-Player.

Navigator voice announcements:

3.5 mm stereo plug. The radio volume is being turned lower, during announcements are coming from navigations

system. Please adjust the volume at the navigator!

GSM mobile phone:

The supplied blue coded cable provides universal hands-free connection via 2.5 mm stereo plug (like used by some

MOTOROLA phones). For many GSM telephone brands you can find suitable adapters in GSM phone accessory shops,

because the 2.5mm stereo plug has also been established as the quasi-standard for various hands-free kits.

The telephone has to be able to be programmed to „automatic call reception” and adjusted likewise.

If you do should not need GSM phone connection, the GSM cable can be used as well for connecting PMR radios with

2.5 mm stereo socket to the GSM plug (without any need of an optional adapter).

Hints for installation and connection

Fitting of helmet sets:

The two helmet sets consist of two flat padded ear sets to be inserted in the helmet, a microphone with a flexible thin

boom to be installed close to your mouth and a waterproof transmit talk button which can be fixed within reach of the

handle-bar or at your glove.

Supplied are two self-adhesive pads for fitting the earphones in the helmet and a velcro tape adjustable in length to

install the talk button. These adhesive pads do have an adhesive surface on one side (remove protective foil), on the

other side there is a velcro clasp so that ear sets can be easily installed or removed for adjustment or cleaning. Bikers

with only limited space to install the talk button i. e. on a metal plate at the handle bars may remove the velcro tape and

stick the talk button with adhesive pads directly to the desired location.

Please fix the ear sets with still a small gap between the ears and the helmet. Your ears should not be completely

covered by the ear set because then you might not be able to listen to the surrounding noise of traffic (due to Road

Traffic Act you may not use headsets that

completely cover

your ears because you might overhear honking or other

signals).

Please do not carry out any technical modifications at the helmet before installing the headset. The ECE standard for

motorbike helmets does not permit to flatten the material inside the helmet i. e. to make space for the ear set. Fix the

microphone so, that it is always close to your mouth with the supplied adhesive pad. Before fixing the adhesive pads

thoroughly clean the desired location (i.e. with alcohol, but do not use any solvent). Press tightly and remember that it

takes several hours until the final strength has been achieved.

You need the talk button only in case you want to operate an additional PMR radio or another Walkie Talkie. You do not

need the talk button for the basic intercom function between driver and passenger or radio/MP3. As long as only

Intercom is used, the cable sets plugs for PMR radio, the talk button and / or GSM phone cable do not need to be

inserted. This makes basic installation very simple- just plug in the 2 headphones, and that’s it!

Where to locate the central unit

The best place for location of the central unit is inside or close to the tank knap sack or in the outside-pocket of your

biker-suit. The headset cable leading to the driver simultaneously serve as the radio antenna (use the spiralled cable

only for pillion) . Lead the driver headset cable along your back under the biker-suit to get best results of the FM radio.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Midland Albrecht AE600S in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Midland Albrecht AE600S Manual

Product: