622039

Midland Alan HP450 2A Rugged Manual

13
Zoom out
Zoom in
Previous page
1/26
Next page
10
English
channels hold down p or q.
3) Press PTT(orwaitveseconds)tostorethesetting.
2It is obvious that other parties shall also have to select the same
channel, otherwise communications will not be possible.
2This adjustment must be carried out within ve seconds, otherwise
the radio returns to the standby mode storing the currently set
channel.
5.5.a How to select the channel
The HP450 2A radio has been programmed as follows:
• Channelsfrom1 to 8 are programmed with the 8 radio frequencies
of the PMR446 band
• Channels from 9 onwards are programmed with the same
repeated radio frequencies (for example channel 9 has the same
frequency of channel 1, channel 10 has the same frequency of
channel 2, etc.), but also include CTCSS tones or DCS codes. If
you select these channels, CTC or DCS displays.
2For the PMR band, your dealer will inform you about the channels
to use
I If you need to communicate with transceivers of different
brands, it is generally preferable to use one of the rst eight
channels to ensure maximum compatibility. It is obviously
necessary to select the less used channel of your area. If the
parties you are communicating with use a HP450 2A device
(or a device with CTCSS tones), you may choose any channel.
If all the eight PMR446 frequencies are occupied in your area,
you can select a channel from 9 to 16 (the less busy one) to
allow the CTCSS tone or DCS code to enable you to listen to
communications of the members of your group only.
2For more information on CTCSS tones and DCS codes, see O 5.8
and 5.9.
5.6 Receiving and transmitting
2The reception/transmission mode described below is the so-called
"open trafc mode", which is simplest one. It is however possible
also to set other modes as described in paragraph 5.8.
During reception and transmission try and keep the aerial as vertical
as possible so that the signal can be transmitted without hindrances.
This precaution optimises the radio signal.
5.6.a Reception
As soon as the signal has been received, the squelch disables
automatically, the status LED turns green and icon
displays
showing the intensity of the received signal.
2If the signal is received fragmented because of weak signals, try
using the monitoring feature.
5.6.b Transmission
1) Verify that other parties are not connected to the selected channel
(status LED off).
2) Hold PTT down: the status LED turns permanently red to indicate
that the transmission is in progress, while indicator
indicates
the transmission power.
3) Waitafewseconds,thentalknormallyataboutvecentimetresfrom
the transceiver transmitter. Your message will be simultaneously
heard by all the parties listening to the same channel.
4) To end the communication, press PTT: the status LED switches
off to indicate that the device has returned to the reception mode
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midland Alan HP450 2A Rugged at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midland Alan HP450 2A Rugged in the language / languages: English as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Midland Alan HP450 2A Rugged

Midland Alan HP450 2A Rugged User Manual - German - 29 pages

Midland Alan HP450 2A Rugged User Manual - French - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info