738662
33
Zoom out
Zoom in
Previous page
1/146
Next page
Safety first 5
2.3 Safety
Your ALAN HP106/HP406 handheld transceiver has been carefully desi-
gned to give you years of safe, reliable performance. As with all electrical
equipments, however, there are a few basic precautions you should take
to avoid hurting yourself or damaging the radio:
Read the instructions in this handbook carefully. Be sure to save
it for future reference.
Read and follow all the warning labels and instruction on the
radio itself and on the accessories.
Don’t carry the transceiver by the antenna. This may damage the
antenna or antenna terminal. Grasp it by its base (not the tip!)
when you need to place or remove it.
Don’t keep the radio with the antenna very close to you, or tou-
ching exposed parts of the body, while transmitting. The radio
will perform best if the microphone is 5-10 cm away from the
mouth and the radio is vertical.
Be sure the PTT key is not accidentally depressed when you
don’t need to transmit.
Do not operate the radio near unshielded electrical blasting caps
or in an explosive atmosphere.
Don’t transmit without the antenna fitted on the radio or with a
damaged antenna. Though it is provided with a protection, it may
seriously damage the TX output final stage.
Respect the environment conditions. The radio is designed to be
used in heavy environments, however avoid exposing it to extre-
mely hot or cold temperature (out of the range between –30° to
+60°C). Don’t expose the transceiver to excessive vibrations as
well as dusty or rainy places.
Never try to disassemble or service the radio by yourself (aside
from the routine maintenance described in this handbook). It will
immediately void the warranty and you may cause damage
requiring extensive repair work. Always contact your local dealer
for assistance.
Grasp your radios firmly. Otherwise it may fall and be damaged.
Use only genuine accessories. Non original ones could seriously
damage your handheld transceiver.
Do not use your radio near water or spill liquid of any kind into it.
If the transceiver gets wet immediately, dry it by a soft and clean
cloth.
Switch the radio off before you clean it. Strictly follow the direc-
tions stated in Chapter 8.
Handle the battery properly. Strictly follow the directions stated
in Chapter 8.
Be certain that your power source matches the rating listed for
the supplied battery charger. If you are not sure, check with your
dealer or with your local power company.
To avoid damaging the power cable of the battery charger, do
not put anything on it or place it where it will be walked on.
This product complies with the requirements of the Council Directives
89/336/EEC and 73/23/EEC on the approximation of the laws of the
member states relating to electromagnetic compatibility and low voltage.
English
ISTR106_int 26-09-2003 9:47 Pagina 5
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midland Alan HP106 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midland Alan HP106 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info