4 Setup
4.1 Items supplied with the radio
Before using the transceiver, always make sure that the semi-rigid
EVA box contains the following items:
• Thetransceiverwiththerubber(xed)aerialandtherechargeable
battery pack
• Theholsterinrigidpolycarbonatewithrotatingcliptoxtheradio
to the belt. Toproperlyxtheradiointotheholster,pushthe
holster.
• Thedesktopbattery-charger(thatincludesthechargingseat,the
AC adapter and AC cable)
• Beltclip
• RubbercapfortheMike/SPKjacks
• Theoperatingmanual(thismanual)
If any of the above-described parts are missing or damaged,
immediately contact the retailer.
2To operate the radio, use the Ni-MH or Li-Ion battery pack.
4.2 Fixing/removing
the optional belt clip
To remove the clip from the battery pack,
unhook the battery pack from the radio,
then pull the release lever, situated on
the upper part of the clip, outwards, then
remove it pulling it upwards.
To reinsert the clip, insert the guides into
the grooves on the rear of the battery
pack, then slide the clip downwards until it snaps in place.
4.3 Removing/installing the battery pack
Depending on the model, the transceiver can be tted with the
following battery packs:
• BP4511-NiMHbatterypack,1,100mAh
• BP4522-Li-Ionbatterypack,2,200mAh
IIf you are planning not to use the transceiver for a long period
of time, remove the battery pack.
IBe careful not to soil/damage the contacts of the battery
compartment of the radio and battery pack.
4.3.a Removing/installing battery pack
To insert the battery pack:
1) Insertthebatterypackasshowninthegure.
2) Push the battery pack down towards the transceiver until it clicks
in place.
To remove the battery pack:
1) Press and hold down the battery release button.
2) Remove the battery pack from the upper side of the transceiver.
Lever
Guide
Groove
1
2