543212

Midland Alan 42 multi Manual

12
Zoom out
Zoom in
Previous page
1/54
Next page
12
19. Battery compartment: insert 6 alkaline batteries or 8 rechargeable
Ni-Mh batteries.
20. Hole for wrist belt
21. Channel UP: to skip to the next channel. Keeping this button pressed, the
“autorepeat” function is obtained.
22. Channel DOWN: to skip to the previous channel. Keeping this button pressed,
the “autorepeat” function is obtained.
23. Battery pack contact: lift the button and take the batteries out (see drawing).
24. Auxiliary antenna contact: for the connection to the vehicular adaptor.
INSTALLING/REMOVING THE BATTERY CASE
Alan 42 Multi works with both Alkaline and with Ni-Mh rechargeable batteries.
For this reason, 2 kinds of battery case are supplied: empty battery case for 8
penlight AA type rechargeable batteries with charge jack and an empty battery
case for 6 penlight AA type alkaline batteries.
To remove the battery case, lift the side trigger and slide the battery case off. Put
the batteries in.
To replace the battery case, slide it again onto the dual track system of the back
side of the transceiver.
RECHARGE OF THE BATTERIES
The battery recharge can be possible only by using the NiMH rechargeable battery
case.
Do not try to charge alkaline batteries or non rechargeable batteries. Make sure
that when you charge the radio, only rechargeable NI-MH batteries should be con-
tained in the battery compartment!
Use a socket ready accessible for ac/dc adaptor; Connect the socket of the wall
adaptor to a mains power socket and insert the jack of the wall adaptor into the
charge jack of the battery case.
When charging is complete detach the socket of the wall adaptor from the mains.
To obtain the maximum performance and capacity, at the first use of the radio, it is
highly recommended to completely discharge/recharge the batteries 2 or 3 times.
WARNINGS
! The supplied wall charger is using “standard charging” method. This is a me-
thod, where the charging current is about 10 % of the capacity. Using this me-
thod, chargers do not automatically disconnect charging when batteries are
fully charged.
! You should avoid to keep the radio permanently connected to the wall charger,
when you do not need it.
! The charger is only designed for NiMH rechargeable batteries and cannot be
used for standard Alkaline or other not chargeable batteries. Trying to charge
such kind of batteries can be a risk. Such batteries may leak, explode or even
burn and cause damage or personal injuries!
! Please use only the supplied wall charger type and no other charger.
! Dispose of the batteries according to the procedures set out by local regula-
tions.
! Mains plug used shall remain readily operable.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midland Alan 42 multi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midland Alan 42 multi in the language / languages: English, German, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 2,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info