738476
16
Zoom out
Zoom in
Previous page
1/72
Next page
4 | Alan 42 DS instruction guide
is turned on, it always transmits with high power (4W). By pressing this button,
the unit will transmit with low power (1W). The display will show “LOW”. Press
again the H/L button to return to “HIGH” power level.
12. LOCK button: it allows you to lock the keyboard, thus avoiding accidental use
of the keys.
13. Q.UP - Q.DOWN buttons: to skip 10 channels up (Q.UP) or 10 channels
down (Q.DOWN).
14. Loudspeaker
15. Dual Watch: this function allows the synthonization on two dierent channels
at the same time. Thanks to this function, you can monitor a second channel.
When a signal on the second channel is received, the conversation on the first
channel is automatically interrupted and the receiver switches on the second
channel. The monitoring starts again 4 seconds after the signal end.
To activate this function, operate as follows:
- Select the desired channel through the channel selector
- Press the DW button
- Select the second channel
- Press the button DW again
- To cancel the function press again the DW button or the PTT button.
16. SCAN /Noise Blanker button: with this control, you can automatically seek for
a busy channel.
- Rotate the squelch clockwise until the background noise is no longer he-
ard; or rotate the knob totally anti-clockwise to use the digital squelch.-
Press the ‘’SCAN’’ button: the transceiver will scan automatically all the
channels until a carrier is being received.
- When it finds the carrier, it stops and starts again some seconds after the
end of the communication on the channel.
- When the radio is transmitting, the scan function is deactivated.
- Keep pressed the SCAN button for 2 seconds to activate the Noise Blan-
ker filter; “AM” or “FM” will blink on the display.
17.
button: display lighting (temporized).This function allows to operate
in darkness conditions. By pressing this button, the display is lighted for 5
seconds.
18. Push to talk button (PTT): Its pressure activates the transmission. When it is
released, the receiver is activated.
19. Battery compartment: insert 6 alkaline batteries or 8 rechargeable
Ni-Mh batteries.
20. Hole for wrist belt
21. Channel UP: to skip to the next channel. Keeping this button pressed, the
autorepeat” function is obtained.
22. Channel DOWN: to skip to the previous channel. Keeping this button pressed,
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midland Alan 42 DS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midland Alan 42 DS in the language / languages: English, German, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 1,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info