Manual Midland 278 (page 10 of 48) (English, German, French, Italian, Polish, Portuguese, Spanish)

543230

Zoom out

Zoom in

1/48

ENGLISH

INSTALLATION

Safety and convenience are the primary consideration for mounting any piece of mobile

equipment. All controls must readily available to the operator without interfering with the

movements necessary for safe operation of the vehicle. Set the proper position in the car to

install the transceiver using the supplied supporting bracket or eventually the slide bracket.

Tighten the retaining screws. The fixing bracket must be close to metallic parts.

POWER SUPPLY

Be sure the transceiver is OFF. In the direct-voltage power supply, is very important to obser-

ve the polarity even if the unit is protected against the accidental inversion:

Red=positivepole(+)

Black = negative pole (-)

The same colors are present on the battery and in the fuse box of the car. Correctly connect

the cable terminal to the battery.

ATTENTION

To obtain best performances we recommend to install the radio in a place with enough

air circulation.

INSTALLING AN ANTENNA

1. Place the antenna as high as possible

2. The longer is the antenna, the better will be the performance

3. If possible, mount the antenna in the center of whatever surface you choose

4. Keep antenna cable away from noise sources, such as the ignition switch, gauges,etc.

5. Make sure you have a solid metal-to-metal ground connection.

6. Prevent cable damage during antenna installation.

WARNING: To avoid damage, never operate your CB radio without connecting a proper

antenna. A periodical control of the cable and of the S.W.R. is recommended.

REPLACING FUSE

IfyoureplacethefuseforDCpowerCord,useF5A250Vtype.Theparametersandthe

symbol of the fuse are indicated in the following label.

F5A 250V +

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Midland 278 in the language / languages: English, German, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Midland 278 Manual

Product: