543226

Midland 210 DS Manual

14
Zoom out
Zoom in
Previous page
1/78
Next page
4 | Midland 210 DS Instruction Guide
INSTALLATION
An extremely important requirement is the ease of installation and re-
moval for those occasions when you might want to remove the unit for
service and maintenance.
The most common mounting position for a transceiver is under the da-
shboard directly over the drive shaft hump. Do not mount the transceiver
in the path of the heater or air conditioning.
Take your time and plan your installation carefully. When you have de-
termined the best location for mounting, use the mounting bracket as a
template to mark mounting holes. Take care when you drill the holes that
you do not drill into wiring, trim or other accessories.
Mount in position with bolts, lock washers and nuts or self-threading
screws.
Insert the power cable with lighter plug into the vehicle’s cigarette lighter
cord.
Before operating, you must install and connect your antenna system. The
lead from the antenna you’ve installed should be connected to the an-
tenna coaxial connector. If you are using an external speaker, connect it
to the EXT-SPKR jack.
INSTALLING AN ANTENNA
A mobile antenna system is not limited to the antenna only. The transmis-
sion line, as well as the vehicle, are important factors in the total anten-
na system. Therefore, you must use the correct type of transmission line
and mount the antenna securely in a position that will give you optimal
results.
Use coaxial cable with an impedance of 50 Ohms. Generally speaking,
you should keep the length of the transmission line to a minimum.
The above discussion is as important for reception as it is for the transmis-
sion. If a mismatch exists between the antenna and the receiver, the
excellent sensitivity and signal-to-noise radio of the receiver circuit will
be defeated.
Useful information
1. Place the antenna as high as possible
2. The longer the antenna is, the better will be the performance
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midland 210 DS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midland 210 DS in the language / languages: English, German, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info