684486

Midea RG58 Remote control Manual

3
Zoom out
Zoom in
Previous page
1/9
Next page
5
7
8
Operation of buttons
Timer Button
Press this button to initiate the auto-on/
auto-off time sequence.
Do Not Disturb Button( )
Fan Button
You can not switch the fan speed in AUTO
or DRY mode.
Press Fan, MODE, Sleep, ON/OFF ,ECO or
Gear button will cancel the Silent function.
NOTE：
Hold down this button for at least 2 seconds
to activate/cancel mode.Silent Due to low
frequency operation of compressor, it may
result in insufficient cooling and heating
capacity (applicable to the air conditioner
with Silent feature only)
Operation of buttons
9
10
11
Swing Button
OK Button
Direct Button
Used to confirm the optional functions.
Used to stop or start horizontal louver
movement. The louver will swing up and
down automatically.
Used to set the desired air flow direction.
The louver changes 6 degree in angle for
each press.
Options Button
12
Press this button to select the air conditioner
function in a sequence of following:
Self clean
Electric heating
Sleep
Follow me
Fresh
Press the button to select the desired
function, the selected symbol will flash on
the display area, then press the button
to confirm.
Options
OK
Repellent
FRESH function( )
When the FRESH function is initiated, the
Ionizer/Plasma Dust Collector(depending on
models) is energized and will help to
remove pollen and impurities from the air.
FOLLOW ME function( )
Repellent function( )
When the Follow Me function is activated,
the remote display is actual temperature
at its location. The remote control will send
this signal to the air conditioner every 3
minutes interval until press the FOLLOW
ME button again.
The mosquito repellent module will be
activated which generate some frequency
sound to scare off mosquito.
Press this button to turn off the indoor screen
display, and also turn off the Air conditioner
buzzer, the fan speed shifts to low, which
create a comfortable and quiet environment.
Press it again to cancel this function.
Under Do Not Disturb mode, the display
will illuminate for 10 seconds while adjusting
the mode, set temperature or fan speed, etc.
2
2
9
9
10
10
11
11
12
12
13
13
8
8
Temp
Mode Fan
Swing
Direct
OK
Timer
Super
Options
Temp
Mode Fan
Swing
Direct
OK
Timer
Super
Options
1
1
4
4
5
5
3
3
6
6
7
7
Selects fan speeds in the following order:
AU
20%
60%
40%
80%
F%.
Press the Temp or Temp button to
increase/decrease the fan speed in
increments.
1%
6
Super Button
Press this button under cooling operation,
the set temperature will change to 17 C,
the fan speed shift to high and bring faster
cooling operation.
Press this button under heating operation,
the set temperature will change to 30 C,
the fan speed shift to high and bring faster
heating operation.
This function is not available under AUTO,
DRY,FAN,Self Clean or Comfort mode.
Press MODE,FAN,SLEEP or ECO button
will cancel Super function.
O
O
NOTE:
HEAT
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midea RG58 Remote control at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midea RG58 Remote control in the language / languages: English as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info