684488
9
Zoom out
Zoom in
Previous page
1/16
Next page
8
Full-automatic programming:
This function is used to cook after a certain period of time with a certain duration, The food to
be cooked is put into the oven The oven is adjusted to the desired cooking function. The oven
temperature is adjusted to the desired degree depending on the food to be cooked.
First: Press "
" button until you see " Dur " on the timer screen. Use " " " " button to adjust
cooking period for the food you wish to cook. Press "
" button to conrm, the day's time will
appear on the screen and the symbols " A " will begin to continuously light on the screen.
Second: keep pressing on "
" button until you see " End " on the timer screen. When you see
" End " on the timer screen, Use " " " " button to adjust nishing time, Press "
" button to
conrm, the day's time will appear on the screen and the symbol " A " will begin to continuously light
on the screen.The symbol "
" disappears until the time cooking starts.
You can set a time which can be up 23.59 hours after the time obtained by adding the cooking
period to the day's time.
The oven will start operating at the time calculated by deducting the cooking period from the set
nishing time, and will stop at the set nishing time. The timer will give an audible warning and the
symbol "A" will begin to ash .After bringing the cooking function and oven temperature to " 0 "
position. any button less than 3 seconds, it will stop the audible warning.
Pressing "
" for more than 3 seconds set the oven to Manual mode again to use the oven.
Please note Once setting full:-automatic mode all the, time can no t be changed Change. time
means cancle automatice progamme and enter into corresponding mode If you need to reset
automatic mode, need to stop setting the current mode to set the automatice mode according to the
above steps again.
Spectication
1> When setting the date of each function, long press on " " or " " for more than 3 seconds the
date will progressively and rapidly increase or decrease.
2> When setting each of the time function, if there is none operation for 5 minutes then it will return
to manual mode.
3> When setting each of the time function, pressing on "
" for more than 3 seconds can cancel
current setting and enter manual mode.
4> During time function setting, pressing on " + " and "
" for more than 3 seconds, a beep
sounds it can cancle the curent time function setting and enter standby mode.
5> We suggest that you run the oven elements for 15 minutes at 200 degrees to burn off any
residuce from their surfaces.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midea MO5BL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midea MO5BL in the language / languages: English as an attachment in your email.

The manual is 0,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info