658483
114
Zoom out
Zoom in
Previous page
1/122
Next page
104 Appendix E: Best Grounding Practice
VeniceU
Operator Manual
connecting balanced external processing equipment to the insert points, the connection
method described in this section should be adopted so as to benefit from the CMR of the
external unit.
For an example of how to wire a ground referenced insert, see Figure 2 on page 15.
Unbalanced connections
Ground loops with unbalanced signals are more difficult to deal with, but there are
several good techniques available. Firstly, many sources of unbalanced signals are
battery or class 2 powered devices without a safety earth connection, thus ground loops
are not being generated. These signals can be connected via single conductor cables
with an overall ground shield and should not present any problems.
Signal ground lift
Older processing equipment is often unbalanced, but even if it is a class 1 device, very
often the internal signal ground can be isolated from the safety ground. This is
normally achieved by setting an external "ground lift" switch or breaking an internal
link. Refer to the equipment’s manual and qualified technicians for advice on any such
internal links. If ground isolation is available it should be used so that the screen
ground connection from the insert points on the console provide a reference for all
signals within the inserted unit, eliminating the possibility for induced noise to corrupt
the signal path. Two-core cables should be used with one core carrying the signal and
the other carrying the ground plus an overall screen (also grounded). The screen can
be connected at both ends or, as with balanced systems, it can be broken at one end if
that improves performance. Some experimentation may be needed.
Ground lift connection on destination
Ground lift connection on source
Chassis
Chassis
Earth lift
switch
Source
Destination
Screen
Chassis
Chassis
Earth lift
switch
Source
Destination
Screen
114


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midas VeniceU U16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midas VeniceU U16 in the language / languages: English as an attachment in your email.

The manual is 5,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info