658483
70
Zoom out
Zoom in
Previous page
1/122
Next page
60 Chapter 7: Output Section
VeniceU
Operator Manual
Output module notes
Before looking at the function of the output section of the console, it is essential that
you are comfortable with a few of the console’s features that affect groups, matrices
and auxes. Rather than discuss these features in each section (although they will be
repeated there), an understanding of their function in a more general context is
desirable.
Group-aux changeover
The VeniceU can be used as a front of house (FOH) console or
monitor console. Monitor engineers tend to prefer the output
faders on their console to operate the aux outputs (for monitors),
whereas FOH engineers would rather use their output faders for
groups (either for sub mixes or alternative outputs).
To achieve this flexibility, the VeniceU has an aux c/o
(aux/group changeover) switch, so that each output can be
individually ‘changed over’ so that the group output path
becomes that of the aux output and vice versa.
The VeniceU has been developed with real world sound engineers
in mind. The real flexibility of the VeniceU is in the speed in
which the changeover can be made and also the ability to create
a console that can be used for FOH and monitors in a smaller venue where you still
need monitors, but don’t have space for a monitor engineer or console.
Pressing the aux c/o switch will connect the aux bus to the group insert, group mute,
group meter, group solo, group fader, group pan and finally the group output XLR.
The group bus is connected to the aux output pot and to the aux output XLR.
This routing flexibility is available on each of the four group/aux buses.
>> To operate the aux c/o switch
We recommend using a pointed (but not sharp) object, such as a ballpoint pen.
Meter changeover
You can meter the monitor (1 and 2) or matrix (1 and
2) outputs, rather than the group outputs. For
example, if using the matrix outputs to drive delay
speakers, it may be desirable to monitor those
outputs.
Note: If you have used the group aux c/o switch,
the group meters will show the aux outputs.
The monitor and matrix switches send the relevant
signal to the meter array.
Note: Meters are post-fader and post-mute.
For more information on VeniceU signal routing, see Appendix A "Functional
Block Diagrams" on page 75.
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midas VeniceU U16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midas VeniceU U16 in the language / languages: English as an attachment in your email.

The manual is 5,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info