658469

Midas PRO6 Manual

662
Zoom out
Zoom in
Previous page
1/666
Next page
622
PRO Series Live Audio Systems
Owner’s Manual
Pschycoacoustic noise: Noise that affects the
physiology of the listener.
Q
Quick access button: Button for navigation/
selection of a channel/bus/processing area.
R
RAM: Abbreviation for “Random access
memory”.
Return: Auxiliary return or aux return. An
extra input used for receiving a signal from the
output of an internal or external effect
processor. See Bus.
Reverb: An effect where the ambience of a
physical space is simulated. This is done by
copying a signal and replaying at regular
intervals at ever decreasing levels. The
intervals are so close that each copy is not
heard individually.
RMS: Abbreviation for “root-mean-square”. The
square root of the mean of the sum of the
squares. Commonly used as the effective value
of measuring a sine wave's electrical power. A
standard in amplifier measurements. The
effective average value of an AC waveform.
RS: Abbreviation for “right surround”. The
right-hand rear speaker in a 5.1 surround
system.
S
s: Symbol for “second”. A unit of time.
Scene: In automation, a set of mix settings for
a particular part of a performance, for example,
a play or song.
Sibilance: Energy from a voice, centred around
7kHz, and caused by pronouncing "s", "sh" or
"ch" sounds.
Side chain: A special circuit that diverts a
proportion of the main signal so that it can be
processed, as required. Compressors use the
side chain to derive their control signals.
Signal flow: The path of a signal from one
place to another.
SIP™: Abbreviation for “solo in place”.
SIS: Abbreviation for “spatial imaging system”.
Combines a central loudspeaker cluster with a
left-right system to form three discrete sound
channels.
Snapshot: A captured group of mixer settings
that reflect the state of the mixer at a particular
moment within a performance. This snapshot
can then be recalled at the required moment in
the performance/playback.
Solo: During monitoring, the isolation of one
signal by silencing all other signals.
Source: The patch connector from which a
signal is patched. See Patching.
SPL: Abbreviation for “sound pressure level”.
Given in decibels (dB), SPL is an expression of
loudness or volume.
Splash screens: The GUI display during power
up.
SRC: Abbreviation for “sample rate converter”.
SSD: Abbreviation for “solid-state disk”. Data
storage device that uses non-volatile memory to
store data. Quicker than the conventional hard
disk and less susceptible to the failures
associated with hard disk drives.
Status indicator: A device specifically designed
to show the condition of something. For
example, an LED that shows whether a
pushbutton is on or off, or a meter showing the
level of a signal.
Stereo: Two separate channels, left and right,
used to give the listener the perception of where
the noise is coming from. Usually used with
music to give a fuller, more natural sound.
Stereo image: The perception of the different
sound sources coming from far left, far right or
anywhere in between.
Surround: Audio that has more that two
speaker locations and, therefore, more than two
channels. Also commonly termed “surround
sound”.
Synchronisation (sync): Coordination of
timing between devices.
T
Tab: A ‘sheet’ in the From and To sections that
contains a specific group of patch connectors.
See Patching.
TFT: Abbreviation for “thin film transistor”.
Threshold: Level at which dynamics processing
will begin to operate.
Tie line: A dedicated connection between two
systems, typically between FOH and MON
positions.
To section: The rightmost area of the Patching
screen that contains the destination patch
connectors. See Patching.
… 662 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midas PRO6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midas PRO6 in the language / languages: English as an attachment in your email.

The manual is 30,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info