658471

Midas PRO3 Manual

657
Zoom out
Zoom in
Previous page
1/666
Next page
617
PRO Series Live Audio Systems
Owner’s Manual
Glossary
This glossary provides an explanation of the symbols, terms and abbreviations used in this manual.
5.1 surround: A surround sound system
created from six channels that form a discrete
signal, which is played back over a speaker
system comprising five speakers (three front
and two rear) and a subwoofer (which is the “.1”
or LFE channel). See LFE.
µ: Micro- prefix symbol that represents 10
-6
or
one millionth.
A
A/D: Abbreviation for “analogue to digital”. The
conversion of a continuous signal into a numeric
discrete sample sequence.
AC: Abbreviation for “alternating current”.
AES/EBU: Abbreviation for “Audio Engineering
Society/European Broadcasting Union”. See
AES3.
Acoustic feedback: A sound loop existing
between an audio input and audio output that is
amplified on each cycle. For example, a mic
input signal is amplified and passed to a
loudspeaker. The output from the loudspeaker
is picked up the mic, which amplifies it again
and passes it back to the loudspeaker, and so
on.
AES3: Also known as “AES/EBU”, this is a serial
interface for transferring digital audio between
devices.
AES50: AES digital audio engineering standard.
AES50 is a high resolution, multi-channel audio
interconnection (HRMAI). Rather than a
network, it is a high-performance, point-to-point
audio interconnection, although the auxiliary
data may operate as a true network,
independently of the audio. HRMAI provides a
professional multi-channel audio interconnection
that uses Cat 5e data cable and is compatible
with Ethernet networks.
AFL: Abbreviation for “after fader listen”. A
function that allows the signal to be monitored
post-fader, that is, after it has been acted upon
by the fader.
Algorithm: In computing, a set of instructions
for accomplishing a specific task.
amp (A): Abbreviation for “ampere”. A unit of
current.
Anti-aliasing: When referring to digital images,
a technique that avoids poor pixelation.
Area A: Primary input control area.
Area B: A secondary input control area.
Assignable controls: User-assignable controls
that can be set up to operate other functions.
Auto safe: Prevents channel from accepting
scene recall.
Auto-mute: A function that automatically
mutes the channel’s signal under certain
conditions.
Auto-mute group: A function that
automatically mutes a number of selected
channels under certain conditions.
Automation: 1. Memorization and playback of
changes made to mixer settings. 2. An area on
the master bay that controls these.
Aux: Abbreviation for “auxiliary send” or “aux
send”. A designation for extra buses, typically
used for sending signal to effects, headphone
amps and other destinations. See Bus.
Aux send: See Aux.
B
Balanced audio: A type of audio connection
that uses the three leads in a cable, connector
and jack as part of a phase-cancelling
arrangement to boost the signal and reduce
noise.
Band: In EQ, a range of frequencies.
Bandwidth: In EQ, the width of a band, that is,
the number of frequencies that will be
boosted/cut above and below a centre
frequency.
Bank: A fixed number of channels displayed on
a GUI screen.
Bass: Lower frequencies in a signal.
Bay: One of the main control surface sections.
… 657 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midas PRO3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midas PRO3 in the language / languages: English as an attachment in your email.

The manual is 30,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info