658471

Midas PRO3 Manual

77
Zoom out
Zoom in
Previous page
1/666
Next page
37
PRO Series Live Audio Systems
Owner’s Manual
Chapter 4: Setting Up The System
This chapter shows you how to set up a live audio system to its default configuration.
Note: If you want to set up the system using a configuration other than the default,
please contact Midas Technical Support for details.
Initial set-up procedure
Initial system set-up basically comprises:
• Unpacking and checking the equipment — see “Unpacking the equipment” on
page 37.
• Making up a rack — see “Making up a rack” on page 37.
• Connecting up the equipment — see “Wiring instructions” on page 38.
• Powering the equipment — see “Powering the system” on page 42.
• Initial patching — see “Setting up the I/O rack devices” on page 92. It is
important to set up the type of snakes connected in the system.
• Configuring the rack unit(s) — see “Setting up the ID of the unit(s)” on page 44.
Unpacking the equipment
After carefully unpacking the equipment, save all packing materials, as they will prove
useful should it become necessary to transport the equipment later.
Inspect the equipment carefully for any sign of damage incurred during transportation.
It has undergone stringent quality control inspection and tests prior to packing and was
in perfect condition when it left the factory. However, if the equipment shows any signs
of damage, notify the transportation company without delay. Only you, the consignee,
may institute a claim against the carrier for damage during transportation.
Making up a rack
In the standard supply, the rack supplied with the your system is fully fitted with the
DL371 Audio System Engine unit and the I/O unit(s) appropriate for your system.
However, should you wish to re-configure the system to suit your own needs, take note
of the rack requirements as detailed in the following subsection.
Outboard equipment rack requirements
To ensure the correct installation and function of the outboard equipment, any rack has
to meet the following general requirements:
• Shock mounting (for non-installation environments) The rack must provide
adequate shock protection of the units it houses by incorporating
appropriately-designed shock protection methods. For example, a foam-suspended
rack or a frame suspended on anti-vibration mounts.
• Ventilation The PRO Series rack units have been designed such that their internal
ventilation airflow is drawn in through the front of the unit and expelled though the
rear. To facilitate this, rack design must ensure that cool air can flow freely through
the rack in the same direction, that is, in through the front of the rack and out
… 77 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midas PRO3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midas PRO3 in the language / languages: English as an attachment in your email.

The manual is 30,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info