658471

Midas PRO3 Manual

62
Zoom out
Zoom in
Previous page
1/666
Next page
22 Chapter 2: PRO Series Live Audio Systems
PRO Series Live Audio Systems
Owner’s Manual
Effects processing and GEQs
The PRO Series contains six or eight mono Klark Teknik (KT) GEQs and seven effects
processors as standard.
The seven effects processors can be freely chosen from:
• KT DN780 reverb.
•Delay.
•Flanger.
•Phaser.
• Pitch shifter.
• SQ1 dynamics.
• Stereo 3-band compressor.
The six or eight mono KT GEQs can be patched into any output. There are many
patching options for the effects processors:
• Assign to any insert send/return.
• Assign to any pool, in or out.
• Assign FX out to aux return.
• Assign FX in to aux send (post-fade).
• Assign FX out to bus direct in.
• Assign FX in to channel direct out.
A Klark Teknik DN9331 RAPIDE motorised fader GEQ controller can be used with the
PRO Series. This unit provides rapid adjustments of the graphics with real hardware,
and not a mouse and screen. The graphic channel is selected either by the solo button
(solo tracking system (STS™)) on the PRO Series Control Centre or by buttons on the
DN9331 itself.
Audio physical connections
The maximum total number of physical analogue XLR connections possible on a PRO
Series Live Audio System is 288, plus the six local monitor outputs, talkback line out,
talk line in and talkback mic in on the rear of the control centre. The 288 configurable
connections can be any combination of inputs and outputs, in multiples of eight of each
type.
The maximum number of 288 configurable I/O can be increased up to 576 if a
combination of different types of I/O card used. The five available card types are
DL441, DL442, DL443, DL444 and DL452 (see Table 2 “Range of PRO Series equipment
supply” on page 14). Any three of these cards can be fitted directly into the rear of a
PRO Series Control Centre, and the remainder are fitted in the configurable I/O boxes.
All of the configurable I/O are freely routable on a scene-by-scene basis.
Surround capabilities
Theatres and broadcast have differing requirements for surround and both are catered
for in the PRO Series.
Conventional stereo and SIS™ panning is assignable on a channel-by-channel basis
(channel one can be in stereo, while channel two can be in SIS™), as follows:
• Stereo left–right routing to master buses.
• SIS™ left–right–centre routing to master buses.
… 62 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midas PRO3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midas PRO3 in the language / languages: English as an attachment in your email.

The manual is 30,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info