658461

Midas M32 Manual

30
Zoom out
Zoom in
Previous page
1/61
Next page
30 M32 DIGITAL CONSOLE User Manual
remote
The SETUP screen’s remote tab allows the M32 to be set up as a control surface
for various DAW recording software on a connected computer. With its large
complement of motorised faders, the console can act as an excellent controller,
allowing the user to make level adjustments quickly and easily without
usingamouse.
To adjust the various remote settings, perform the following steps:
1. Tap the rst push encoder to enable the M32’s REM - DAW REMOTE button
on the control surface. This switches various console hardware, such as
the bus faders, to control computer DAW software instead of the console’s
internal audio path.
2. Adjust the second encoder to select the specic control surface protocol
used, in conjunction with the target DAW software. Choices include:
• Mackie Crtl: Use this protocol to control any DAW software that is
compatible with a Mackie Control hardware surface
• HUI: Use this protocol to control any DAW software that is compatible
with an HUI hardware control surface, such as Pro Tools
• Midi CC: Use this protocol to control software via MIDI. More detailed
information can be found in Appendix B: MIDI Operation.
3. Tap the second encoder to assign the currently selected control
surfaceprotocol.
4. Adjust the fth encoder to select whether the remote function uses the MIDI
IN and MIDI OUT sockets, the card’s MIDI, or RTP (Real Time Protocol) MIDI.
5. Tap the fth encoder to conrm the selection.
6. Turn the sixth encoder to adjust various MIDI-based operations for the
console. Choices include:
• MIDI In/Out: This toggles the MIDI input and output on or o
• Card MIDI: Allows MIDI transmission through the DN32-USB card
• RTP (Real-Time Transport Protocol): This toggles on or o the console’s
ability to interface with an Ethernet-based MIDI system
• Rx PrgC: Toggles on or o the console’s ability to receive
ProgramChange messages
• Tx PrgC: Toggles on or o the console’s ability to send Program
Changemessages
• Rx Fader: Toggles on or o the console’s ability to receive
Fadermessages
• Tx Fader: Toggles on or o the console’s ability to send Fader messages
• Rx Mute: Toggles on or o the console’s ability to receive
Mutemessages
• Tx Mute: Toggles on or o the console’s ability to send Mute messages
• Rx Pan: Toggles on or o the console’s ability to receive Pan messages
• Tx Pan: Toggles on or o the console’s ability to send Pan messages
• X/OSC: Open Sound Control, toggles on or o the console’s ability to
communicate with the iPad application.
7. Tap the sixth encoder to toggle the currently selected MIDI option on
or o. This can be useful if you want to ensure that any connected MIDI
transmitters cannot interfere with the console.
NOTE: For more detailed information about MIDI,
seeAppendixB:MIDIOperation.
network
The SETUP screen’s network tab contains settings used when connecting the
M32 to a standard Ethernet network. The user can set parameters such as using
a xed IP address, or having one assigned, as well as setting up Ethernet and
subnet mask settings.
To set the network address for the console, perform the following steps:
1. Adjust the rst push encoder to select which specic network eld to adjust.
Choices include:
• IP address
• Subnet Mask
• Gateway.
2. Adjust encoders 2, 3, 4 and 5 to set the four numerical elds to be adjusted
for the selected network eld.
3. Tap the sixth encoder to assign the adjusted settings.
scribble strip
The SETUP screen’s scribble strips tab allows customisation for all of the M32’s
channel LCD displays, including Aux, FX, Buses, Matrices and DCAs.
On the scribble strips tab the user can make useful adjustments, such as
assigning real names to the selected channel (such as ‘drums’ or ‘backing
vocals’), as well as assigning colours to them that are then reected on the
console’s channel LCD screens.
To adjust the various LCD display settings, perform the following steps:
1. Adjust the rst push encoder to select which of the channels you wish
toedit.
2. Adjust the second encoder to set the colour for the currently selected
channel’s scribble strip.
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midas M32 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midas M32 in the language / languages: English as an attachment in your email.

The manual is 9,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info