1
1
X router’s AES50 audio - bank 1 connectors to
AES50 audio - A X connector on mic splitters and
AES50 audio X connector on line I/O boxes
Control centre AES50 audio Y connectors to FOH
rack line I/O unit AES50 audio Y connectors
33
44
77
A
A
B
1
1
1
1
1
1
1
1
Stage rack 3
Control centre AES50 audio X connectors to FOH
rack line I/O unit AES50 audio X connectors
Control centre snake/optical X and Y
connectors to appropriate X or Y router’s
snake/optical connector
Control centre snake/CAT6e X and Y
connectors to appropriate X or Y router’s
snake/CAT6e connector
X router’s AES50 audio - bank 0 connectors
to AES50 audio X connector on DSP units
Y router’s AES50 audio - bank 0 connectors to
AES50 audio Y connector on DSP units
X router’s Ethernet control connectors to
Ethernet control X connectors on DSP units
Y router’s Ethernet control connectors to
Ethernet control Y connectors on DSP units
Y router’s AES50 audio - bank 1 connectors to
AES50 audio - A Y connector on mic splitters and
AES50 audio Y connector on line I/O boxes
A
Mic splitter
B
Line I/O box
Link DSP backbone; see “To daisy chain the DSP
units” on page 44
C
DSP unit
D
Router (X and Y)
Key
Note: For connections specific to the 19” rack units,
please refer to their respective operator manuals
Router interconnection across Ethernet connectors
(control expansion port). System snake
redundancy will be compromised without it!
22
11
B
B
FOH rack
Caution!
Don’t forget the
interconnection
between the two
routers, as system snake
redundancy will be
compromised without it.
RAPIDE “ETHERNET” connector to Ethernet
control 1 connector on the control centre
ID: 3
Inputs: 49 - 72
IP: 192.168.32.3
ID: 4
Inputs: 73 - 92
IP: 192.168.32.4
ID: 5
Config: O/O/D
IP: 192.168.36.5
ID: 1
Config: I/O/D
IP: 192.168.36.1
ID: 2
Config: I/O/D
IP: 192.168.36.2
ID = identification number
IP = internet protocol (that is, network address)
Config = configuration
I/O/D = input/output/digital
O/O/D = output/output/digital