658486
29
Zoom out
Zoom in
Previous page
1/70
Next page
Menus 13
DL471 DSP
Operator Manual
Menus
The eight menus in programming mode are as follows:
Unit ID (1) — for setting up the DL471 DSP’s network unit ID (see “Unit ID menu
(1)” below).
Temperature (2) — for viewing the temperature within the DL471 DSP unit. The
temperature value continually updates so that you can view the temperature
fluctuations (in 0.25°C increments).
LED brightness (3) — for adjusting the brightness of the LCD screen and the LEDs
(see “LED brightness menu (3)” on page 14).
LCD contrast (4) for adjusting the contrast of the LCD screen (see “LCD contrast
menu (4)” on page 14).
Firmware (5) for viewing the unit’s host software, which scrolls across the
bottom of the display.
SMIB Version (6) for viewing the unit’s SMIB version, which scrolls across the
bottom of the display.
Main Board LCD contrast (7) for viewing the current revision of the unit’s main
board.
AMELink Speed (8) for change the speed of the AME link (see “AMELink Speed
menu (8)” on page 15).
For example views of the displays, see “Menu flowchart (menus 1 to 4)” on page 10 and
“Menu flowchart (menus 5 to 8)” on page 12.
Unit ID menu (1)
Each networked unit must have a unique ID number that identifies it from other DSP
units on the network. This option allows you set up the DL471 DSP unit with its own
unique network ID number.
Note: Units are usually numbered sequentially from 11 to 20.
>> To set up the unit’s ID number
1 In programming mode, select the “Unit ID” menu (see
“To select a menu” on page 9). The current unit ID
will be shown on the bottom line of the display, for
example, “1”.
2 Press SELECT. The flashing character shows you are
in unit ID set up mode.
3 Use the down/up arrow buttons to go to the unit ID
number you want (in the range 0 to 255). For
example, “15”.
4 Press SELECT to select the currently displayed ID
number. The flashing will stop.
5 Press MENU.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midas DL471 DSP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midas DL471 DSP in the language / languages: English as an attachment in your email.

The manual is 4,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info