658489

Midas DL371PRO9 Manual

53
Zoom out
Zoom in
Previous page
1/58
Next page
Powering the PRO6 system 51
DL371 Audio System Engine
Operator Manual
Powering the PRO6 system
The following details the recommended power up and power down procedures for the
PRO6 system.
Note: If you are in any doubt as to how to switch the DL3n1 units on/off, refer to their
operator manuals.
>> To power up the PRO6 system
Important Note:
DO NOT switch on the speaker sub-system until after the start-up of the PRO6
system has been completed.
After all PRO6 system interconnections have been made (refer to Figure 2 “Standard
system configuration” on page 50), start up the PRO6 system:
1 Make sure that all of the PRO6 system equipment is switched off, such as the
PRO6 Control Centre, speaker sub-system, DL351 Modular I/O unit and DL371
Audio System Engine unit.
2 Switch on the PRO6 Control Centre (see “To switch on the PRO6 Control Centre”
on page 52).
3 In the master bay of the PRO6 Control Centre, move all of the monitor and
master channel faders to the minimum position and mute all of the master
channels.
4 Power up the PRO6 components, such as the DL351 Modular I/O unit and the
DL371 Audio System Engine unit. This can be done in any order you like.
5 After the status indicator at the top of each GUI screen has
changed to green (as shown right), switch on the speaker
sub-system.
6 Switch on the audio source and start playing the audio.
7 On the PRO6 Control Centre, check that the audio inputs are routed to the master
channels. Then, unmute the master channels and gradually increase their faders
while listening to the sound levels from the speakers.
If there is no sound at all coming from the speakers when the faders are at maximum,
move the faders to below the 0dB level and check if the audio is muted somewhere
along the input paths and also check that the individual speakers are switched on. If
there is still no sound from the speakers, see “No audio” on page 73.
>> To power down the PRO6 system
Important Note:
BEFORE switching off any of the PRO6 system components, don’t forget to
mute the audio from the speakers and switch off the speaker sub-system.
1 Mute the audio from the speakers and switch off the speaker sub-system.
2 Switch off the DL351 Modular I/O unit.
3 Switch off the DL371 Audio System Engine unit.
4 Switch off the PRO6 Control Centre (see “To switch off the PRO6 Control Centre”
on page 52).
… 53 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midas DL371PRO9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midas DL371PRO9 in the language / languages: English as an attachment in your email.

The manual is 4,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info