658489
43
Zoom out
Zoom in
Previous page
1/58
Next page
Mix matrix 41
DL371 Audio System Engine
Operator Manual
16-off matrix buses, routable from the 56 inputs and eight aux inputs, and 16 aux
buses and three master buses.
16-off aux buses, routable from the 56 inputs and eight aux inputs.
All the bus routings (above) provide simultaneous and time aligned mixing of all the
sources, which will be defeatable for minimum latency requirements.
For monitor mixing, the master, matrix and aux buses can all be routed directly from
the input channels with independent level controls providing up to 35 monitor mix
buses.
For traditional FOH sub group mixing, any (or all) of the aux buses can change to
operate post-channel fader and pan (that is, aux gain fixed at unity).
Auxiliary inputs have two modes of operation: effects return and input channel. In
input channel mode (default) they will have aux, master and matrix routing, insert
points and EQ (like regular inputs channels), but no dynamic capability. They are
controlled like regular inputs from the input bay and channel strip, and are time aligned
to the stage like regular input channels. In effects return mode the channels have
routing to matrix and masters only and no insert or dynamic capability. They are
controlled from the aux return area and time aligned to the effects engines.
Mix matrix
Ultimately, the mix matrix defines the capability of the PRO6 Control Centre. Probably
the best way to imagine the mix matrix is to think of an analogue console layout, where
inputs run vertically and buses run horizontally. A mix matrix is usually defined as the
number of buses and the quantity of simultaneously-mixable inputs there are per bus.
The following diagram illustrates the capability within the control centre.
16 aux
buses
64 in x 16 out
mix matrix
{}
80 in x 3 out
mix matrix
16 matrix
buses
83 in x 16 out
mix matrix
3 master (stereo
and mono) buses
{}
{}
56 mic/line inputs 8 mic/line return inputs
6 solo
buses
99 in x 6 out
mix matrix
{}
Bus outputs
Bus inputs
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midas DL371PRO9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midas DL371PRO9 in the language / languages: English as an attachment in your email.

The manual is 4,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info