658489
31
Zoom out
Zoom in
Previous page
1/58
Next page
15
DL371 Audio System Engine
Operator Manual
Chapter 4: Getting Started
This chapter shows you how to connect up and switch on the DL371 Audio System
Engine unit.
Connecting up
Refer to Figure 2 “Standard system configuration” on page 50.
Connect up the your DL371 Audio System Engine unit as follows:
Snake — connect the two fibre optic/copper snakes to the required X and Y sockets
on the rear panel of the DL371 Audio System Engine unit and then to the rear of the
PRO6 Control Centre. See “Connector panel” on page 12.
AES50 — connect the four AES50 audio sockets (1 to 4) on the rear panel of the
DL371 Audio System Engine unit to the corresponding AES50 audio sockets on the
rear panel of the DL351 Modular I/O unit. See “Router panel” on page 13.
Synchronisation (optional) — connect the word clock or AES3 sync connectors
to the required clock source.
Mains power supply — connect the mains cables. See “Powering the unit” on
page 15.
Powering the unit
This section shows you how apply power to the unit, and also how to completely isolate
the unit electrically.
Caution:
You must ensure that a minimum of two power supply modules are
powering the unit for correct operation (see “Switching the PRO6
Control Centre on/off” on page 52).
>> To apply power to the unit
Observing the Caution above, carry out the following to power up the unit.
1 Insert the mains plugs of
the mains leads into
mains power outlets
(see “Power” on
page xi).
2 Making sure the power
supply is off at the mains
power outlets, plug their
IEC connectors into the
mains input sockets in
the rear panel of the
DL371 Audio System
Engine unit.
3 Switch on the mains
power outlets.
Mains
plug
Mains
outlet
1
2
Rear panel of DL371 Audio
System Engine
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midas DL371PRO9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midas DL371PRO9 in the language / languages: English as an attachment in your email.

The manual is 4,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info