658463

Midas DL150 series Manual

7
Zoom out
Zoom in
Previous page
1/20
Next page
7
User Manual
The DL150 series I/O units are mixed technology products combining analogue and digital circuitry. These are combined on the
input and output cards using multi-layer horizontal PCBs. Extreme care has been taken when planning and executing the PCB
layout to maintain good grounding and analogue/digital separation.
The DL150 series units use proven technology from the D251 I/O unit from the current MIDAS range. The analogue input and
output cards are identical, the AES3 digital card is similar to the one used in the PRO2 surface and the CPU card is a modied
version of the one used in the DL251.
The user interface software is based on the same menu system currently used on the DL451 and has provision for all of the
functions these units can perform.
Equipped with 24 channels of MIDAS premium mic-pre ampliers with 2.5dB ultra precise gain steps the DL150 Series are the
ideal partner to the PRO1 and PRO2 digital consoles, signicantly increasing mixable mic inputs.
User interface controls and feedback are accessed via an intuitively laid out front panel. The controls and LED indicators provide
ease of use and instant at a glance feedback. All primary connections use high quality balanced XLR connectors.
Integration Within The MIDAS Product Range
Styled to match existing MIDAS console livery, MIDAS high performance I/O has never been easier or more cost eective.
Features
• 96 kHz sample rate operation
• Dual AES50 Neutrik etherCON network ports with LED status indicators
• All settings programmable from either the front panel controls or console
• Remote operation up to 100 m via CAT5 /5e cable
• PSU status indicator LEDs and conguration LCD display on front panel
• Rugged 2U rackmount chassis for durability in portable applications
• Auto-ranging universal switch-mode power supply
Individual Specications
DL151
• 24 award-winning MIDAS analogue mic preamps with switchable +48 V phantom power
DL152
• 24 active-balanced low impedance line-level outputs
DL153
• 16 award-winning MIDAS analogue mic preamps with switchable +48 V phantom power
• 8 active-balanced low impedance line-level outputs
DL154
• 16 active-balanced low impedance line-level outputs
• 8 award-winning MIDAS analogue mic preamps with switchable +48 V phantom power
DL155
• 8 award-winning MIDAS analogue mic preamps with switchable +48 V phantom power
• 8 active-balanced low-impedance line level outputs
• 8 AES3 (AES/EBU) digital inputs and 8 AES3 outputs on XLRF/XLRM
About this manual
This is the operation manual for the DL150 Series Audio System I/O units. It is intended to help get your unit installed and in
operation as quickly as possible by giving you unpacking, installation, connection, setting up and operating instructions. To
help familiarise you with the DL150 Series, there is a description of the front and rear panels, along with easy-to-follow user
instructions.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midas DL150 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midas DL150 series in the language / languages: English as an attachment in your email.

The manual is 6,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info