536864
10
Zoom out
Zoom in
Previous page
1/34
Next page
11. Technical Specifications
According to the Medical Product User Act a biennial technical inspection is recommenden for profes-
sional users. Please observe the applicable disposal regulations.
12. Replacing the Battery
This thermometer is supplied with one lithium battery,
type CR2032. Replace with a new CR2032 battery when
the flashing battery symbol appears on the LCD display.
13. Guarantee
Subject to the following conditions this high-quality measuring instrument is covered by a 2 year guar-
antee from the date of purchase. Warranty claims must be lodged within the guarantee period.
This product was manufactured with the utmost of care according to international quality standards.
Should you have reason for complaints despite this, please send the instrument, accompanied by the
completed Guarantee Card with dealer's stamp as well as original proof of purchase directly or through
your medical supplier to your closest Microlife Distributor.
Damage resulting from incorrect use is not covered by the guarantee. Battery and packaging are exclud-
ed from the guarantee. Claims beyond this, including claims for damages, are excluded.
Name and adress of responsible dealer:
14. www.microlife.com
Detailed user information about our thermometers and blood pressure monitors as well as services can
be found at www.microlife.com.
Type:
Measuring Range:
Accuracy:
Display:
Accoustic:
Memory:
Nite Glow:
Operating temperature:
Storage/transport temp.:
Automatic Switch-off:
Battery:
Dimensions:
Weight:
Standards:
Digital Infrared Thermometer IR 1DB1
0 °C to 100.0 °C (32.0 °F to 212.0 °F)
Laboratory: ±0.2 °C, 32.0 ~ 42.2 °C
(±0.4 °F, 89.6 ~ 108.0 °F)
±1 °C, 0 ~ 31.9°C, 42.3 ~ 100.0 °C
(±2 °F, 32.0 ~ 89.5 °F, 108.1~ 212.0 °F)
Liquid Cristal Display with indicating unit 0.1 °C (0.1 °F)
a. The unit is turned ON and ready for the measurement: 1 short «bi» sound.
b. Complete the measurement: 1 long beep sound.
c. System error or malfunction: 3 short «bi» sounds.
Auto-Display the last measured temperature
a. The display will be lighted for 4 seconds when the unit is turned ON.
b. The display will be lighted again for 5 seconds when the measurement
has been completed.
10 °C to 40 °C (50 °F to 104 °F)
-25 °C to +55 °C (-13 °F to 131 °F)
Approx. 1 minute after last measurement has been taken.
CR2032 BATTERY (X1) - at least 1000 measurements
128 mm (L) x 48 mm (W) x 30 mm (H)
52 g (with battery), 48 g (without battery)
Complies with EN12470-5 and ASTM E-1965 requirements
8
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Microlife IR 1DB1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Microlife IR 1DB1 in the language / languages: English as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info