Manual Microlife IR 1DB1 (page 7 of 34) (English)

536864

Zoom out

Zoom in

1/34

NOTE:

• In order to avoid cross-contamination, please reload a new probe cover for each measurement.

• Please check if the probe cover is fitted on firmly before use (please see the diagrams below); If the

probe cover is broken, discard the probe cover and reload a new one immediately.

(X) Incorrect (O) Correct

7. Directions for Use

Important: Prior to every measurement, fit a new undamaged Probe Cover on the measuring probe. Fail-

ure to do so may result in incorrect temperature measurement.

1. Press the O/I button. The LCD is activated to show all segments for

2 seconds.

2. The last measurement reading will be shown on the display auto-

matically for two seconds with the «M» icon.

3. When the °C or °F icon is flashing, a beep sound is heard and the

thermometer is ready for the measurement.

6. How to Reload a New Probe Cover

(1) Place a probe cover onto the storage case

hole with paper side upwards.

(3) Completely push the probe into the probe

cover holder hole.

(2) Take the unit, vertically penetrate the probe

into the center part of the probe cover.

(4) After feeling a slight «click», take out the

probe with cover attached tightly.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Microlife IR 1DB1 in the language / languages: English as an attachment in your email.

The manual is 0,52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Microlife IR 1DB1 Manual

Product: